Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
LoggerNet 4.0 Licenced Copy - "read failed" error geometrikal 11
CR Basic on a multiple monitor computer rlwoell 4
CR800 with lambrecht wind sensor Jackson.Lopes 2
GPRS modem with RS232 port connect to CR10X erfan 1
can anyone tell how to connect davis air temperature and relative humidity 7859 sensor to CR1000 datalogger? sudhakar veerasamy 3
Basic Table command WX4GPS 3
Modem setup Bo 9
HMP45D pepyor 2
Clarifying Wind Measurements WX4GPS 0
send program to a logger from another via pakbus smile 3
How to combine Data from two tables files in one before save it to server. Evrard 1
CR6 Sleep Mode Command and Power consumption of the logger Evrard 8
How to send email from data logger when turbidity is above a certain value? joedappy 10
loggerlink and cr1000 with ls300 sierra kokihualpa 1
Size of data table files on server skkimball 3
Changes to Gmail SMTP Server Sam 3
reading frequency with CR800 Jackson.Lopes 2
Compiling time on CR1000 Ponce 2
Wind direction in OPEC system Jamal 1
Windsinic is not working Jackson.Lopes 9
Nonintrusive High speed data from CR1000/CR6 Peter R. 1
CR1000 posting to Underground character set is too long? WX4GPS 0
Problems with CR6 and LS300 modem communication (it locks up) maurixio 2
cr1000 Dataloger - Siemens S7-1200 modbus rtu (rs485) comminication cihangarip 0
Request TDF from CR1000 using CR1000? kcopeland 5
Timestamp max Makada 11
How to deploy a instrumantation tower UT30 Jackson.Lopes 3
CR1000 wx2day 2
Replacing Lithium battery of CR800 Jackson.Lopes 0
Pointers and Arrays ryan42 1