这个产品是无效的且被替换: SP10.
概览
The SP10-PW is a 10 W photovoltaic power source capable of recharging batteries. Its 6.1 m (20 ft) cable terminates in a connector that attaches to a Campbell Scientific prewired enclosure. The connector in the enclosure then leads to a power supply or battery base to recharge the battery, allowing unattended operation of systems in remote locations, far from ac electrical sources.
This solar panel has a sufficient charging source for many of our system configurations in tropical to temperate latitudes.
优势与特点
- 在交流电不可靠、昂贵或者不可获得的站点，提供电源
- 给密封可充电电池充电，包括PS100、PS200、BP12（需要CH100或CH200）、BP24（需要CH100或CH200）、CR3000或CR5000
- 快速而安全地连接到Campbell预接线机箱，进行更高效的设置
技术说明
The SP10-PW includes mounting hardware consisting of one pn 17492 U-bolt and matching nuts. The U-bolt has a 5.398 cm (2.125 in.) space between the U-bolt legs. This hardware allows the solar panel to be mounted to a 0.75 in. to 1.5 in. IPS pipe [25.4 to 50.8 cm (1 to 2 in.) OD].
产品规格
- Current at Peak: 0.59 A
- Voltage at Peak: 16.8 V
- Maximum Peak Power: 10 W
- Weight: 2.1 kg (4.6 lb)
- Dimensions:
41.9 x 26.9 x 2.3 cm
(16.5 x 10.6 x 0.9 in.)
Note: Solar panel characteristics assume 1 kW m-2 illumination and 25°C solar panel temperature. Individual panels may vary up to 10%. The output panel voltage increases as the panel temperature decreases.
兼容性
Battery
The SP10-PW is intended to recharge 12 V Gel Cell or AGM lead acid batteries such as the batteries used with the PS150, PS200, BP12, BP24, CR3000, CR5000, and CR6. It is not intended for user-supplied 12 V flooded batteries such as deep cycle marine or RV batteries.
相关技术文档
常见问题解答
SP10-PW: 1
-
Regulators control the current flowing to the battery and prevent the battery current from flowing to the charging source. These solar panels do not include an on-board voltage regulator, so a stand-alone regulator would be required to complete a power supply.
Typically, these solar panels are connected to a CH100, CH200, PS100, or PS200, as well as to the battery base of a CR3000 or CR5000. The PS100 and the PS200, as well as the battery base of the CR3000 and CR5000, include an internal regulator.