03001-L R. M. Young Wind Sentry Set

风速和风向传感器 / 03001-L

停产的 ›
这个产品是无效的且被替换: 03002-L.

Services Available
Repair	No
Calibration	No
Free Support	No

产品图片
相似产品
技术说明
兼容性
相关技术文档
案例研究

概览

The 03001 measured wind speed and direction. It interfaced directly with Campbell data loggers; no signal conditioning required.

图像

相似产品

014A-L 3-杯风速计

27106T-L 垂直风速计

03101-L 风速计

03301-L 风向传感器

024A-L 风向传感器

P2546A-L 三杯式风速计

03002-L 风速风向传感器

034B-L 风速风向传感器

05103-L 风速风向传感器

05305-L 空气质量型风速风向传感器

WINDSONIC1-L 二维超声风速仪，RS-232

WINDSONIC4-L 二维超声风速仪，SDI-12

CSAT3A 三维超声风速仪头

020C-L 风向传感器

技术说明

The 03001 Wind Sentry Set was replaced with the 03002 Wind Sentry Set on January 9, 2009. The 03001 and 03002 use the same vane and anemometer. However the 03002 includes a junction box allowing one cable to connect the entire wind set to the data logger. The retired 03001 used two cables—one for the anemometer and one for the wind vane.

兼容性

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

数据采集器

Product	Compatible	Note
21X (retired)
CR10 (retired)
CR10X (retired)
CR200X (retired)
CR206X (retired)
CR211X (retired)
CR216X (retired)
CR23X (retired)
CR295X (retired)
CR3000 (retired)
CR500 (retired)
CR5000 (retired)
CR510 (retired)
CR800 (retired)
CR850 (retired)
CR9000 (retired)

Additional Compatibility Information

Data Logger Considerations

The anemometer is measured by the PulseCount instruction in CRBasic, and by Instruction 3 (Pulse Count) in Edlog. The wind vane is measured by the BrHalf Instruction in CRBasic, and by Instruction 4 (Excite-Delay-SE) in Edlog. The measurements are typically processed for output with the Wind Vector Instruction (not present in the CR500 or CR9000).

The 03001's anemometer consumes one pulse count channel on the data logger. The Wind Vane requires one single-ended channel and access to an excitation channel (the excitation channel can be shared with other high impedance sensors).