概览
This version of the CS451 pressure transducer is for OEMs. It does not have a label so that the OEM can attach their own branding.
优势与特点
- 质量建设保证产品的可靠性
- 结实的不锈钢外壳保护压阻传感器
- 兼容大多数Campbell Scientific数据采集器
- 完全温度补偿
- 在测量之间为低功耗睡眠状态，减少了功率消耗
- 可选的重鼻锥有利于下沉
- NPT接头可让它用于闭合管路的应用中
- 在收到订单发票之后快速发运（ARO）
- 兼容A150干燥箱，可被连接到CWS900，用于无线的传感器网络中
图像
相似产品
技术说明
The 29326 consists of a piezoresistive sensor and a temperature sensor housed in a 316L stainless-steel case. It has a rugged Hytrel cable that remains flexible, even under harsh environmental conditions. The cable incorporates a vent tube to compensate for atmospheric pressure fluctuations. The vent tube terminates inside a desiccant tube, which prevents water vapor from entering the inner cavity of the transducer.
The 29326 has several pressure range options and two accuracy options (see Ordering). The standard accuracy option provides ±0.1% FS TEB over the 0° to 60°C temperature range. The high accuracy option provides ±0.05% FS TEB over the 0° to 60°C temperature range and includes a calibration certificate. TEB is the combined errors due to nonlinearity, hysteresis, non-repeatability, and thermal effects over the compensated temperature range, per ISA S51.1. Please note that the high accuracy option is not available for the 0 to 2.9 psig range option.
Campbell Scientific offers the A150 Desiccated Case that allows the CS451 to be connected to a CWS900 Wireless Sensor Interface (for use in a wireless sensor network) or to be connected to a prewired enclosure (see Ordering Information).
产品规格
| Measurement Time | < 1.5 s |
| Outputs | SDI-12 (version 1.3) 1200 bps; RS-232 9600 bps |
| Resolution | 0.0035% FS |
| Operating Temperature |
-10° to +80°C WARNING: Sensor could be damaged if encased in frozen ice. |
| Compensated Temperature |
0° to 60°C WARNING: Sensor could be damaged if encased in frozen ice. |
| Temperature Accuracy | ±0.2°C |
| Overpressure | 2 x pressure range |
| Power Requirements | 6 to 18 Vdc |
| Cable Type | Hytrel Jacket, five conductor, 26 AWG |
| NPT Fitting | 1/4-in. NPS |
| Top Cone Material | Delrin |
| Body Material | 316L stainless steel |
| Element Material | 316L stainless steel |
| Distance |
|
| Diameter | 21.34 mm (0.84 in.) |
| Length | 213.36 mm (6.875 in.) |
| Cable Weight | 0.0421 kg/m (0.0283 lb/ft) |
| Weight | 0.17 kg (0.37 lb) without cable |
Power Consumption |
|
| Quiescent | < 50 µA |
| Measurement/Communication | 8 mA (1 s measurement) |
| Maximum | 40 mA |
Pressure Measurement Range |
|
| Option -2 | ≤ 2.9 psig (20 kPa) |
| Option -7 | ≤ 7.25 psig (50 kPa) |
| Option -14 | ≤ 14.5 psig (100 kPa) |
| Option -29 | ≤ 29 psig (200 kPa) |
| Option -72 | ≤ 72.5 psig (500 kPa) |
| Option -145 | ≤ 145 psig (1000 kPa) |
Depth of Fresh Water Measurement Range |
|
| Option -2 | ≤ 2.0 m (6.7 ft) |
| Option -7 | ≤ 5.1 m (16.7 ft) |
| Option -14 | ≤ 10.2 m (33.4 ft) |
| Option -29 | ≤ 20.4 m (67 ft) |
| Option -72 | ≤ 50.9 m (167 ft) |
| Option -145 | ≤ 102 m (334.5 ft) |
Accuracy |
|
| Standard Accuracy Option |
±0.1% full-scale-range TEB Total Error Band (TEB) includes the combined errors due to nonlinearity, hysteresis, nonrepeatability, and thermal effects over the compensated temperature range, per ISA S51.1. |
| High Accuracy Option |
±0.05% full-scale-range TEB The high accuracy (±0.05% full-scale range) option is not available for the 0 to 2.9 psig range option. Total Error Band (TEB) includes the combined errors due to nonlinearity, hysteresis, nonrepeatability, and thermal effects over the compensated temperature range, per ISA S51.1. |
Maximum Cable Length |
|
| SDI-12 |
|
| RS-232 | 60 m (200 ft) |
Air Gap |
|
| Standard & Weighted Nose Cone | 0.653 cm (0.257 in.) |
| NPT Fitting | 2.72 cm (1.07 in.) |
兼容性
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
数据采集器
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | ||
| CR10X (retired) | ||
| CR200X (retired) | ||
| CR206X (retired) | ||
| CR211X (retired) | ||
| CR216X (retired) | ||
| CR23X (retired) | ||
| CR295X (retired) | ||
| CR3000 (retired) | ||
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000 (retired) |
Additional Compatibility Information
Desiccated Case
The CS451 can be used with the A150. The A150 is a small, self-contained junction box that allows the CS451 to be connected to a continuation cable, a prewired-enclosure connector, or a CWS900-series wireless-sensor connector. Connection to a CWS900-series interface allows the CS451 to be part of a wireless sensor network.