RETIRED ›
This product is not available for new orders.
This product is not available for new orders.
| Services Available | |
|---|---|
| Repair | Yes |
| Calibration | Yes |
| Free Support | Yes |
概览
The WindSonic1-ETM is a two-dimensional ultrasonic anemometer for measuring wind speed and direction. On this version of the WindSonic1, the cable is fitted with a connector and has the ideal length for attachment to the ET107 Station. The WindSonic1-ETM includes a 1.2 ft pipe that can be used with the ET107’s crossarm U-bolt bracket.
WindSonics are manufactured by Gill Instruments Ltd.
图像
相似产品
技术说明
The WindSonic1 uses two pairs of orthogonally oriented transducers to sense the horizontal wind. The transducers bounce the ultrasonic signal from a hood, thus minimizing the effects of transducer shadowing and flow distortion.
Unlike mechanical anemometers, the WindSonic1 has no moving parts to be periodically replaced—minimizing routine maintenance costs.
产品规格
| Operating Humidity | < 5% to 100% RH |
| Operating Temperature | -35° to +70°C |
| Storage Temperature | -40° to +80°C |
| Input Voltage | 9 to 30 Vdc |
| Typical Current Drain | ~15 mA (continuous) |
| Measurement Frequency | 40 Hz block averaged to a 1 Hz output frequency |
| Outputs Parameters | Polar (direction and speed) or orthogonal (Ux and Uy wind) |
| Output Signal | RS-232 |
| Maximum Cable Capacitance | 2500 pF |
| Maximum Cable Length |
15.24 m (50 ft) For configurations requiring longer cable lengths, contact an application engineer at Campbell Scientific. |
| Diameter | 14.2 cm (5.6 in.) |
| Length | 16.0 cm (16.3 in.) |
| Weight | 0.5 kg (1.1 lb) |
Wind Direction |
|
| Range | 0° to 359° (no dead band) |
| Accuracy | ±3° |
| Resolution | 1° |
Wind Speed |
|
| Range | 0 to 60 m/s |
| Accuracy | ±2% (@ 12 m s-1) |
| Resolution | 0.01 m/s |
列在
Replacement Part for the following products: