没有提供图片

概览

The 31317 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with an SMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector. This kit includes:

  • Bi-directional coaxial RF protector with hardware, suitable for 700 to 2700 MHz
  • Flange mounting bracket
  • 18 in. Type N to SMA coaxial jumper
  • 24 in. ground wire assembly

Note: For a pre-installed, bulkhead-mounted version of this same kit, see the 31315 Bulkhead Surge Protection Installed in Enclosure, Type N to SMA, 700 to 2700 MHz.

产品规格

Coaxial Jumper
Connector 1 Type N plug
Connector 2 SMA plug
Cable RG174/U
Length 45.7 cm (18 in.)

Surge
Frequency 700 to 2700 MHz
Connectors Type N jack
Mounting Bulkhead mount
Operation
  • DC block (RF only)
  • Bi-directional (Connectors are not antenna/radio specific.)
Insertion Loss < 0.1 dB
Maximum Surge
  • IEC 61000-4-5 8/20 μs waveform
  • 40 kA (max)
  • 20 kA (multiple)
Temperature -50° to +85°C
Materials Tri-plated brass body, PTFE dielectric, tri-metal center pins, SS 5/8-24 hex nut, SS 5/8 lock washer, silicon O-ring
Standards CE compliant, RoHS compliant, IEC 60529 IP67, Bellcore #TA-NWT-000487
Body Diameter 3.0 cm (1.18 in.)
Type N Connector Length 2.41 cm (0.95 in.)
Total Length 9.17 cm (3.16 in.)

Flange Mount
Material Aluminum with stainless-steel screws, nuts, and washers
Dimensions 3.81 x 2.54 x 2.85 cm (1.5 x 1.0 x 1.12 in.)

Ground Wire
Wire Type 12 AWG stranded with PVC jacket
Connector 5/8 crimp ring lug, soldered
Length 61 cm (24 in.)

兼容性

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

通讯设备

Product Compatible Note
LS300G (retired)
RAVENXTG (retired)
RAVENXTV (retired)
RF450 (retired)
RV50 (retired)