This product is not available for new orders.
| Services Available | |
|---|---|
| Repair | Yes |
| Free Support | Yes |
概览
A205 CWS-to-PC 接口支持无线传感器和电脑之间的连接通讯。在为无线传感器选择配置时，A205非常有必要被优先选择 ，其在检测和检修时亦非常有用。
图像
3D/CAD 文件：
技术说明
A205 为4针连接头，可与CWS传感器电池末端的4针公头相连。通过USB端口可与电脑连接，连接时，A205为无线传感器提供电源。
产品规格
| Connectors |
|
| Dimensions | 13.97 x 10.16 x 3.81 cm (5.5 x 4.0 x 1.5 in.) |
| Weight | 68.04 g (0.15 lb) |
兼容性
The A205 is compatible with all of our CWS220-series Infrared Radiometers, CWS655-series Water Content Reflectometers, and CWS900-series Configurable Wireless Sensor Interfaces.
下载
A205 CWS Interface USB Driver v.2.08.28 (1.64 MB) 05-03-2013
A205 USB Drivers for the Windows operating system. 32 and 64 bit support for Windows 8, Windows 7, Windows Vista and Windows XP.
Note: Drivers should be loaded before plugging the A205 into the computer.
常见问题解答
A205: 6
展开全部收起全部
-
No. Use the CRBasic CWB100Routes() instruction in the data logger program to collect information as to which sensors are repeaters.
-
No. The A205 is an interface for communicating directly between a computer and a wireless sensor. It has no impact on the radio communication between the wireless sensor and the wireless sensor base, so line of sight doesn’t matter.
-
No. The A205 is for communication with a single sensor only and cannot access any information related to the wireless sensor network. Use the CRBasic CWB100Diagnostics instruction in the data logger program to collect information on the wireless sensor network performance.
-
No. Use the CRBasic CWB100RSSI() instruction in the data logger program to measure and record wireless sensor signal strength.
-
An A205 is required to write the radio address of the wireless base station to the wireless sensor firmware so that the sensor will respond to polling from the base station. This is done using the Device Configuration Utility software. The A205 is also useful for connecting a computer directly to the CWS655, CWS220, or CWS900 for diagnosis, changing the base station radio address, uploading new firmware, and verifying sensor functionality. It is only necessary to purchase one A205—unless multiple users with multiple computers need to perform these tasks.
-
To incorporate a sensor that is compatible with wireless sensor interfaces into a wireless network, a CWS900-series wireless sensor interface is needed, as well as an A205 CWS-to-PC interface to configure it.