这个产品是无效的.
| Services Available | |
|---|---|
| Repair | Yes |
| Free Support | Yes |
概览
ACL1 用于监测线缆中是否有交流电压通过，以及是否向数据采集器发送了信号。.
优势与特点
- Optically isolated to keep the electrical systems of the monitored wire and the data logger system separate
图像
技术说明
The ACL1 outputs a binary dc signal in response to the presence or absence of an ac voltage on the monitored line. An output that is less than 0.8 Vdc indicates no voltage; an output that is 3.7 to 5.1 Vdc indicates an active voltage.
产品规格
| Cable Length | 1.52 m (5.0 ft) |
| Weight | 0.14 kg (0.3 lb) |
兼容性
The ACL1 uses a 5 Vdc power source (typically a CR7 or 21X control port or CAO), one single-ended analog input channel, and ground. The sensor leads are connected across (in parallel with) a monitored 95 to 240 Vac device. The ACL1 includes a 5-ft wire.
相关技术文档
常见问题解答
ACL1: 2
-
We do not offer any similar devices. Such a device, however, could be constructed by the user and might consist of a 20 or 30 Vac or Vdc SPST NO relay (Single Pole Single Throw Normally Open contact relay) that is operated by the line voltage being monitored. When the relay is energized (when the 20 to 30 Vac or Vdc is supplied to the relay control coil), the contacts on the relay could carry a 5 Vdc signal from the 5 V on the data logger to one of the control ports of the data logger. This signal would then indicate to the data logger that the ac voltage is present.
-
We do not offer any similar devices. Such a device, however, could be constructed by the user and might consist of a line voltage SPST NO relay (Single Pole Single Throw Normally Open contact relay) that is operated by the line voltage being monitored. When the relay is energized (when ac power is supplied to the relay control coil), the contacts on the relay could carry a 5 Vdc signal from the 5 V on the data logger to one of the control ports of the data logger. This signal would then indicate to the data logger that the ac voltage is present.