公司博客: Your source for useful how-to information and helpful expert...

自定义传感器在Short Cut里的设置方法

作者： Jason Ritter | 最后更新： 02/27/2019 | 评论： 4

Have you ever wanted Short Cut to support more sensors? Although Short Cut supports many sensors, you may have found that the sensor you want to measure is not on the list. What do you do then? How do you add that sensor to your... 阅读更多

如何选择正确的脉冲测量方式

作者： Jacob Davis | 最后更新： 04/21/2016 | 评论： 0

Have you ever had a sensor work on a P (pulse) data logger terminal, but not on a C (control) terminal? Is the list of choices for the PConfig parameter in the PulseCount() instruction daunting? Campbell Scientific data loggers offer several options for measuring pulse... 阅读更多

如何利用Modbus来获取实时测量数据

作者： Paul Smart | 最后更新： 04/07/2016 | 评论： 18

Did you know that you can turn your Campbell Scientific data logger into a Modbus TCP/IP server? Do you know why that’s a good idea? Campbell Scientific data loggers are commonly used as Modbus server devices. This means that the data logger is configured to... 阅读更多

5个步骤让你CR6的数据传递给 Weather Underground

作者： Sam Utley | 最后更新： 03/23/2016 | 评论： 10

Note: It appears that after this blog article was written, Weather Underground has been phasing out the “PWS – Upload Protocol.” The following tutorial may or may not work currently or in the future. However, it continues to offer some insight into structuring a CRBasic... 阅读更多

公司博客 Your source for useful how-to information and helpful expert advice

博客主题

Area / Application

Product Category

Activity

搜索博客

订阅博客