显示 1 - 10 of 10 文章 tagged with: CR1000X
作者： Timothy Jeppsen | 最后更新： 03/19/2020 | 评论： 4
We recently released the CR1000X Measurement and Control Datalogger, and you may be wondering how it compares with our widely used CR1000 datalogger and our innovative CR6 datalogger. If you’re in the market for a new data logger, how do you know which one is...
阅读更多
作者： Kevin Rhodes | 最后更新： 12/02/2019 | 评论： 0
Sometimes, it’s hard to let go. But if we don’t let go, we don’t have empty hands ready to embrace something new—even a data logger.
The CR1000 Measurement and Control Datalogger (introduced in 2004) has been incredibly successful with installations on every continent of our planet....
阅读更多
作者： Nathanael Wright | 最后更新： 01/16/2019 | 评论： 2
Did you know you can monitor your data usage using CRBasic program code on our new data loggers with integrated cellular modems and our external Campbell Scientific brand of cellular modules? In this two-part series, I’ll first show you how to do this in the...
阅读更多
作者： Jacob Davis | 最后更新： 02/28/2018 | 评论： 1
Now and then, someone will ask if a Campbell Scientific data logger can be used in place of a PLC (programmable logic controller) or an RTU (remote terminal unit). Admittedly, it is not a simple question to answer. The capabilities of modern PLCs, RTUs, and...
阅读更多
作者： Matt Perry | 最后更新： 01/17/2018 | 评论： 0
During 2017, I was asked several times for a data logger program to retrieve data from Kipp & Zonen’s new RaZON+, a compact-sized dual-axis sun tracker with integrated GPS, smart pyrheliometer, and shaded smart pyranometer. The RaZON+ touts a higher accuracy approach to obtaining solar...
阅读更多
作者： Michelle Welch | 最后更新： 01/04/2018 | 评论： 2
Did you know that you are just a click or tap away from new and improved online data logger assistance? If you have a CR1000X, CR6, or CR300-series datalogger, you’ll want to visit our new resource that is available to you 24/7.
Our new online user...
阅读更多
作者： Timothy Jeppsen | 最后更新： 11/29/2017 | 评论： 0
What do expansion peripherals do, and how is integrating them helpful? Expansion peripherals have two purposes: to expand the capabilities of the data logger, both in channel count and functionality, and to improve measurement quality. What if we could provide both and make it easier...
阅读更多
作者： Timothy Jeppsen | 最后更新： 10/11/2017 | 评论： 8
As soon as people learned that we were replacing the CR1000 datalogger with the CR1000X datalogger, they asked us these questions: “Can I load a program I wrote for my CR1000 into a CR1000X?” and “Will the CR1000X fit in the same space as my...
阅读更多
作者： Dana Worley | 最后更新： 08/30/2017 | 评论： 3
If you have read recent revision history for the Device Configuration Utility (also known as DevConfig), you may have run across the following note: “New USB drivers (RNDIS) were added for [supported] datalogger.” What's that all about? you may have wondered.
Sounds boring, eh?
We think it...
阅读更多
作者： Timothy Jeppsen | 最后更新： 08/02/2017 | 评论： 3
It should come as no surprise that the CR1000 datalogger (introduced in 2004) has been an incredibly successful data logger. With nearly 100,000 deployed, this data logger has been installed on every continent on the earth. Using the design success of the CR1000, Campbell Scientific...
阅读更多
