Toggle navigation
产品
解决方案
支持
关于
主页
产品
解决方案
支持
关于
报价列报
联系
区域网站
区域网站
Africa
Australia
Brasil
Canada
Centro Caribe
Deutschland
España
Europe
France
India
Japan
United States
ภาษาไทย
中国
国家/地区目录
常见问题解答
关于我们的产品和解决方案的常见问题
提问
提问
搜索
所有常见问题
(1979 total: showing 541-560)
Can a straight cable be used between the SC105 and a PC
How should an SC105 and a data logger be connected?
What is the difference between the SC105 and the SC932A?
If the battery cable for the CH100 is missing, can the battery be charged through the +12 and ground terminals—as long as the poles are not switched?
Can the INT/EXT plug on the CH100 be purchased?
What is the maximum distance a solar panel can be mounted from a CH100?
Can CH100 regulators have unidirectional flow, thereby separating two systems from the power consumption of the other system?
Can a 30W solar panel damage a CH100?
What would the output voltage of the CH100 be if there is no battery connected?
When should the light on the CH100 come on, and when should it be off?
When a CH100 approaches the maximum current output, does the voltage stay at a constant 12 V up until that point? Or does the voltage begin to taper off as it reaches the maximum current output?
Is the CH100 compatible for use with two BP24 battery packs in series to provide 24 Vdc?
Is a BP24 with a CH100 equivalent to a PS24?
What is the current consumption of the CH100 or PS100?
Can the A205 be used to determine whether there are communication issues between the wireless sensor and the wireless sensor base?
Can the A205 be used to determine whether a wireless sensor is a repeater in a wireless sensor network?
Can the A205 be used to determine signal strength (RSSI) of a wireless sensor?
To use the A205 with a wireless sensor interface and a wireless sensor base, is direct line of sight necessary?
What type of wind screen can be used for a tipping bucket rain gage?
If a phone line is shared with a seismograph that transmits data when it is called from a computer, is it possible to avoid interference by having the COM220 call out rather than transmit after receiving an outside call?
上一页
下一步