所有常见问题(1837 total: showing 741-760)
- Using the heater, how long does it take for the 0871LH1 to defrost itself and resume its detection of icing conditions?
- Is it possible to upgrade from PC200W to the current version of LoggerNet?
- After purchasing a LoggerNet upgrade license, can the license key be entered into the current installation, or does LoggerNet need to be reinstalled from the CD?
- After upgrading to the newest LoggerNet version, will the new software run old programs?
- When an upgrade from one version of LoggerNet to another is purchased, can both versions be used at the same time by the same user?
- If the LoggerNet upgrade is purchased for the current version license, how does the upgrade work? What is the process for upgrading?
- 软件补丁和升级包之间的差别是什么？
- How can the TCP/IP stack in a CR1000 or CR3000 be used?
- Can the NL120 be repaired? Or does a non-functioning interface need to be replaced?
- What might cause connection issues between a CR1000 or CR3000 and an NL120, resulting in lost data?
- If several CR1000 or CR3000 dataloggers only have a serial interface that is used as the data highway to a SCADA network, can an NL120 be added without interfering with the current serial port data communications system?
- To communicate with a CR1000 or CR3000 by TCP/IP using an NL120 or NL240, is it necessary for the data logger to have a fixed IP address?
- If a CR1000 or CR3000 is connected to an NL120 and it has been assigned an IP address, can configuration changes be made on the data logger using only the IP connection?
- If LoggerNet does not list the NL120, is that OK?
- If a CR1000 or CR3000 is paired with an NL120 for remote access, can a second data logger be connected to the first data logger and the NL120 pull data from both data loggers?
- Can a Wi-Fi device be plugged into the NL120 so that data logger communication can occur using a Wi-Fi service?
- Does an NL120 work with a wireless Ethernet bridge?
- Can an NL120 be used to connect multiple CR1000 or CR3000 dataloggers to the Internet?
- Is there any way to update the firmware of the NL120?
- Can a COM port and an NL120 be used together?
上一页
下一步