停产的 ›
这个产品是无效的.
RAWS-F 远程自动气象站，防火气象
Services Available

概览

我们的RAWS-F 快速部署火险气象站，适用于火险预报或其它的临时安装。用户可在短到10分钟内设置好整个气象站，无需安装工具。每一个RAWS-F 气象站都已经预编程，监测风速和风向、空气温度和相对湿度、降水、大气压以及太阳辐射。程序符合美国国家火险分级系统（NFDRS）气象站标准。

优势与特点

  • 监测、记录和传输与火险预测相关的气象数据
  • 适合临时安装
  • 可被设置成最短10分钟，无需工具
  • 预编程，监测风速风向、空气温度相对湿度、降水、大气压和太阳辐射传感器。
  • 依从美国国家火险评级系统（NFDRS）气象站标准

图像

技术说明

RAWS-F 气象站包含铝材质机箱，固定6英尺的三脚塔上。机箱安放和保护CR1000 数据采集器和由太阳能板和交流充电器充电的12-V 电池。为便于传感器连接，机箱外部有颜色代码区分的键式快速接头。还提供了一个接线面板，允许RAWS-F测量额外的传感器。

气象传感器

包含在RAWS-F中的气象传感器是：CS300-QD 太阳辐射传感器、HC2S3-QD 空气温度/相对湿度探头、TE525-QD 翻斗式雨量筒，以及034B-QD 风速风向传感器（选项 -MW）或WindSonic4-QD 二维超声风速仪（选项 -GW）。CS100-QD 大气压传感器可作为选项 -QB订购），CS516-QD 可燃物含水量/温度传感器可作为普通附件（参阅订货信息）订购。

传感器连接

机箱外部的颜色代码区分的键式快速接头，可连接风速风向、空气温湿度、降水、太阳辐射以及可选的可燃物含水量/温度传感器。除了快速接头，还提供接线面板，可测量大气压、溪流流速、雪深或水深。

通讯方法

RAWS-F 一般通过我们的GOES 卫星发射器进行通讯。它还支持其它的通讯设备，例如电话modem、数字蜂窝modem和电台。

运输箱

按RAWS-F的组件，配置了两个合适的运输箱，可以轻松运输RAWS-F气象站到您的站点。

产品规格

-NOTE- The RAWS-F has components that have their own specifications.

To review these specifications, refer to the appropriate products below:
Tripod Material Aluminum
Enclosure Material Aluminum
Hard Transport Case Holds sensors, enclosure, solar panel, crossarm, and antennas.
Soft Transport Case Holds tripod, mast, and grounding kit.
Connector Descriptions Color-coded keyed connectors for attaching sensors.
Tripod Height 1.8 m (6 ft)
Tripod Weight 13.6 kg (30.0 lb)
Enclosure Dimensions 35.6 x 45.7 x 22.9 cm (14.0 x 18.0 x 9.0 in.)
Enclosure Weight 12.6 kg (27.75 lb) fully loaded with CR1000M, connector panel, and 7 Ahr battery
Hard Transport Case Dimensions 96.5 x 63.5 x 43.2 cm (38 x 25 x 17 in.)
Soft Transport Case Dimensions 94.0 x 45.7 x 15.2 cm (37 x 18 x 6 in.)
Hard Transport Case Weight 16.3 kg (36.0 lb)
Soft Transport Case Weight 4.1 kg (9.1 lb)

兼容性

Sensors and solar panels with a "-QD" suffix have a cable that terminates in a military style connector that attaches to the RAWS-F. The cable length of these products is ideal for attachment to the RAWS-F tripod.

Sensors

The following sensors can be attached to the connector panel.

Connector Label Compatible Sensors (one sensor per connector)
WS/WD 034B-QD
FM/FT CS516-QD
Temp/RH HC2S3-QD
PRECIP TE525-QD
SDI-12 WINDSONIC4-QD
SOLAR RAD
SDI-12		 CS300-QD

Barometer

The CS100-QD barometric pressure sensor is also compatible. It is mounted inside of the RAWS environmental enclosure and the sensor wires are attached to the CR1000 printed circuit board wiring panel.

Battery Chargers and Solar Panels

The following can be used to recharge the internal battery.

Connector Label Compatible Device (choose one)
BATT CHARGER/
SOLAR PANEL		 18897 wall charger,
SP10-QD 10 W solar panel, SP20-QD 20 W solar panel

Communications

Our GOES satellite transmitter is offered as an option for the RAWS-F. It is also compatible with communication equipment such as telephones, digital cellular transceivers, and radios.

常见问题解答

RAWS-F: 1

  1. What are the options for accessing data on a weather station?

    Campbell Scientific offers several software options, which are outlined below:

    1. PC200W
      • Provides basic tools (clock set, program download, monitor data, retrieve data, etc.)
      • Only works with direct connections between a PC and a data logger (that is, connecting through a serial COM port, such as a short haul RAD modem or radio); no telecommunication, such as phone modems or Internet
      • Offers simple tools to view and graph data files
      • Does not include the CRBasic Editor or Edlog software
      • Does not do automated scheduled data collection
      • Is available as a free download from our website
    2. PC400
      • Has all of the features of the PC200W
      • Compatible with additional telecommunications options, such as IP ports and phone modems; does not work with combined communications options such as phone-to-radio
      • Offers additional features, including the CRBasic and Edlog program editors
      • Does not do automated scheduled data collection
      • Is not offered as a trial version
    3. VisualWeather
      • Has been designed for use with weather stations
      • Allows connection to the station, viewing of current conditions, and data collection
      • Does not include the CRBasic Editor or Edlog program editors
      • Generates reports and graphs
      • Does automated scheduled data collection
      • Can be set up to create web content and transfer it to a web server via FTP
      • Is available as a 30 day downloadable trial version
    4. LoggerNet
      • Is not as simple to use as the other software options, but contains the tools needed to communicate with, program, manage, and collect data from a single data logger or a network of data loggers
      • Includes the CRBasic and Edlog program editors
      • Can communicate with any configuration of hardware and telemetry offered by Campbell Scientific
      • Includes tools to view, graph, and manipulate data files
      • Does automated scheduled data collection
      • Has a task manager to manipulate data files following collection
      • Is available as a 30 day downloadable trial version
访问常见问题解答资料库

文章和新闻发布