Services Available | |
---|---|
Repair | Yes |
Calibration | Yes |
Free Support | Yes |
SDMX50LP 是3种 50-欧姆的同轴的 8:1 扩展板中的一种,用于TDR100测量系统。这种扩展板设计用于安装在用户提供的防护机箱中。它含有具有电涌防护功能的扩展板电路板,一端连接到黑色亚光处理的背板上。扩展板电路板从背板延伸出来的高度约 5” (13 cm),整体呈L形。背板上的多个孔提供了对同轴缆的应力释放点。
Strain Relief Bracket Dimensions | 26.7 x 27.9 x 1.3 cm (10.5 x 11 x 0.5 in.) |
Circuit Board Dimensions | 24.9 x 12.2 x 4.6 cm (9.8 x 4.8 x 1.8 in.) |
Power Requirements |
|
Input Power | 12 Vdc |
Quiescent Current Drain | < 1 mA |
Current Drain during Switching | ~ 90 mA (All multiplexers of the same level switch simultaneously for less than 1 s.) |
SDMX50LP: 6
展开全部收起全部
PC-TDR is a free download in the Downloads section of the PC-TDR web page..
These three multiplexers all use the same relay board, but the housing differs. The multiplexers are described side-by-side on page 2 of this brochure.
The most popular model is the SDMX50SP, followed by the SDMX50.
In applications where TDR probes are used to measure soil water content, the maximum distance from the TDR probe back to the TDR100/TDR200 (even through one or more multiplexers) cannot exceed 15 m (50 ft) when using RG58 coaxial cable; the CS605-L, CS630-L, and CS640-L TDR probes have an RG58 cable. When using low-loss coaxial cable, the distance cannot exceed ≈25 m (80 ft); the CS610-L, CS635-L, and CS645-L TDR probes have a low-loss coaxial cable.
In slope stability and rock mass deformation applications, the maximum coaxial cable length should not exceed ≈1 mile (5,280 ft). The maximum combined length of all SDM cables in the system should not exceed ≈76 m (250 ft).