概览
The 18356 leveling base, manufactured by Apogee Instruments, is required to attach the CS300, CS320, or SP230 pyranometer to our CM225 solar sensor mounting stand. The 18356 levels the sensor in the horizontal plane, helping to ensure accurate solar radiation measurements. The 18356 uses a bubble level and three adjustable leveling screws to level the sensor.
图像
技术说明
18356具备几个功能：
- 为CS300提供了安全而稳固的安装。一个螺栓将CS300固定到调平底座上。
- 水平泡和三个调平螺丝可将传感器调节到水平位置，保证了精确的太阳辐射测量。
- 该底座使用3个固定螺丝连接到CM225太阳辐射传感器支架，整体可装配到一系列的设备支架上。
产品规格
| Why/When to Use | Levels solar radiation sensors manufactured by Apogee Instruments. |
| Diameter | 7.6 cm (3.0 in.) |
| Weight | 91 g (0.2 lb) |
兼容性
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
相关技术文档
常见问题解答
18356: 1
-
The leveling base provides physical stability and helps ensure the sensor is leveled correctly. It is not recommended to use the sensor without the base. The sensor mounts to the base with an included bolt. However, a user-supplied plate with a hole drilled in it could be used instead to accept the sensor’s mounting bolt.
Note: Whatever mounting method is used, the sensor has to be levelled to operate correctly.