公司博客 Your source for useful how-to information and helpful expert advice

博客主题


搜索博客


订阅博客

出现新文章时获得邮件。选择您感兴趣的主题。


输入您的邮箱地址:



推荐文章

您是否想了解一个主题更多?请让我们知道。

Leave this field empty

显示 1 - 13 of 13 文章 tagged with: CR6

Understanding the Roles of Data Loggers, RTUs, PLCs, and PACs

作者: Jacob Davis | 最后更新: 02/28/2018 | 评论: 1

understanding the roles of data loggers, rtus, plcs, and pacs

Now and then, someone will ask if a Campbell Scientific data logger can be used in place of a PLC (programmable logic controller) or an RTU (remote terminal unit). Admittedly, it is not a simple question to answer. The capabilities of modern PLCs, RTUs, and... 阅读更多

Kipp & Zonen’s RaZON+ : 数采程序

作者: Matt Perry | 最后更新: 01/17/2018 | 评论: 0

 kipp & zonen’s razon+ : 数采程序

During 2017, I was asked several times for a data logger program to retrieve data from Kipp & Zonen’s new RaZON+, a compact-sized dual-axis sun tracker with integrated GPS, smart pyrheliometer, and shaded smart pyranometer. The RaZON+ touts a higher accuracy approach to obtaining solar... 阅读更多

Get Answers to Your Data Logger Questions Quickly

作者: Michelle Welch | 最后更新: 01/04/2018 | 评论: 2

get answers to your data logger questions quickly

Did you know that you are just a click or tap away from new and improved online data logger assistance? If you have a CR1000X, CR6, or CR300-series datalogger, you’ll want to visit our new resource that is available to you 24/7. Our new online user... 阅读更多

New Ethernet over USB Functionality for Data Loggers

作者: Dana Worley | 最后更新: 08/30/2017 | 评论: 3

new ethernet over usb functionality for data loggers

If you have read recent revision history for the Device Configuration Utility (also known as DevConfig), you may have run across the following note: “New USB drivers (RNDIS) were added for [supported] datalogger.” What's that all about? you may have wondered. Sounds boring, eh? We think it... 阅读更多

Introducing the CR1000X: A New Generation of Data Loggers with Proven Functionality

作者: Timothy Jeppsen | 最后更新: 08/02/2017 | 评论: 3

introducing the cr1000x: a new generation of data loggers with proven functionality

It should come as no surprise that the CR1000 datalogger (introduced in 2004) has been an incredibly successful data logger. With nearly 100,000 deployed, this data logger has been installed on every continent on the earth. Using the design success of the CR1000, Campbell Scientific... 阅读更多

5个步骤让你CR6的数据传递给 Weather Underground

作者: Sam Utley | 最后更新: 03/23/2016 | 评论: 10

5个步骤让你cr6的数据传递给 weather underground

Over the years, you may have seen a number of Weather Underground PWS (personal weather station) discussions and solutions posted on the Campbell Scientific User Forum. In this article, I’ll show you how to post your data directly from an Internet-connected CR6 Measurement and Control Datalogger... 阅读更多

6个步骤帮助你从源代码中获取数据

作者: Gary Roberts | 最后更新: 03/02/2016 | 评论: 1

6个步骤帮助你从源代码中获取数据

Would it be helpful to include data from a reputable source with your own data? If you have permission to use another source’s data for free or by agreement, how can you easily extract the specific data you want to use without doing a lot... 阅读更多

实现MD485超长线缆组网的4个提示

作者: Andrew Sandford | 最后更新: 12/23/2015 | 评论: 0

实现md485超长线缆组网的4个提示

Do you have a network of devices, connected using MD485 interfaces, so spread out that extremely long cables are required? Are you worried that the distances, and resultant cable lengths, may be causing communication problems? In this brief article, we’ll look at four tips that... 阅读更多

数组的运用:复制或传递

作者: Janet Albers | 最后更新: 07/21/2015 | 评论: 0

数组的运用:复制或传递

Copying or transposing has become easier with OS 28 (CR6 OS 1). This new operating system enables you to copy portions of an array to a new location, such as when transposing rows and columns. In this example we start with A(3,2) (3 rows, 2 columns) initialized as... 阅读更多

数组的运用:实现复杂的修正

作者: Janet Albers | 最后更新: 07/01/2015 | 评论: 0

数组的运用:实现复杂的修正

You can perform more complex scaling in an array without needing a For/Next loop. To take advantage of this feature, use OS 28 (CR6 OS 01) or later.   In this example program, a unique set of multipliers and offsets is applied to the column of an... 阅读更多

数组的运用:初始化多维数组

作者: Janet Albers | 最后更新: 06/10/2015 | 评论: 0

数组的运用:初始化多维数组

Initializing variables within an array is more flexible than ever with OS 28 (CR6 OS 1). You can think of a single dimensioned array as numbers in a column. Two dimensions, in comparison, puts numbers in rows and columns. The third dimension is a page. For example:... 阅读更多

数组的运用:简单的修正

作者: Janet Albers | 最后更新: 05/29/2015 | 评论: 0

数组的运用:简单的修正

The newest operating system released by Campbell Scientific for its data loggers is OS 28 for the CR800, CR1000, and CR3000. (The comparable operating system version for the CR6 datalogger is OS 01.) This powerful data logger OS has been enhanced so that you can... 阅读更多

数据采集器 CR1000X, CR1000, 和 CR6 对比

作者: Timothy Jeppsen | 最后更新: 08/16/1717 | 评论: 0

数据采集器 cr1000x, cr1000, 和 cr6 对比

We recently released the CR1000X Measurement and Control Datalogger, and you may be wondering how it compares with our widely used CR1000 datalogger and our innovative CR6 datalogger. If you’re in the market for a new data logger, how do you know which one is... 阅读更多