这个产品是无效的且被替换: CM106B.
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
概览
CM106 是一款可调节镀锌钢管三脚塔，可在7到10英尺之间任意调节,所以它可以取代6英尺的CM6和10英尺的CM10。CM106因为采用薄壁管而更为轻巧一些。CM106可用来安装各种传感器、太阳能板、天线和仪器机箱。
优势与特点
- 支持气象传感器、水文传感器、传感器安装支架、太阳板板、机箱
- 便携式设备安装支架
- 包含：避雷针和接地棒、地线、地线坚固管箍、地桩和抗紫外绑扎带
- 机箱能够被固定到三脚塔的斜腿上，也可以固定到主桅杆上
图像
技术说明
CM106具有独立可调节的斜腿以便适用于不平坦的地形。桅杆高度可达2.1m，or 可扩展至3m。
CM106包括避雷针和接地棒，接地线缆，防紫外线绑扎带，固定三脚塔所用钢钎。另外可选配件套装用于在高风速的情况下安装三脚塔（请参看参数表中的风速范围）。订购仪器机箱可选择固定托架，将机箱安装在三脚塔的桅杆或斜腿上。
CM106可用于多种应用。在气象观测站中，使用合适的安装支架可将传感器安装在三脚塔上。对于非气象应用，可将机箱、太阳能板、接线箱或天线安装在三脚塔上。
| CM106可替代CM6和CM10。用镀锌薄壁管取代了CM6/CM10的镀锌管，使其更轻便，而且CM106可将机箱安装在它的斜腿上。 |
产品规格
| Vertical Load Limit | 45 kg (100 lb) |
| Leveling Adjustment | Slide collars on each leg adjust individually. |
| Maximum Slope Angle | 22° or 40% grade (Maximum slope angle assumes that the leg clamp pins are engaged in the holes under the legs, and that one leg points downhill while the other two legs point uphill.) |
| Leg Base | 10.16 x 12.7 cm with four 1.58 cm hole for stakes (4 x 5 in. with four 0.62 in. holes for stakes) |
| Base Diameter | 2.8 m (9.3 ft) |
| Main Lower Mast Outer Diameter | 48 mm (1.90 in.) |
| Retractable Upper Mast Outer Diameter | 44 mm (1.74 in.) |
| Weight with Mast | 18 kg (40 lb) |
Measurement Height |
|
| Upper Mast Retracted | 2.1 m (7 ft) |
| Upper Mast Extended | 3 m (10 ft) |
Maximum Allowable Sustained Wind |
|
| -NOTE- |
Allowable sustained wind and wind gust values assume the following:
|
| Mast Extended |
|
| Mast Retracted |
|
Maximum Allowable Wind Gust |
|
| -NOTE- |
Allowable sustained wind and wind gust values assume the following:
|
| Mast Extended |
|
| Mast Retracted |
|
兼容性
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
固定设备
| Product | Compatible | Note |
|---|---|---|
| 019ALU (retired) | ||
| CM202 | ||
| CM202SS | ||
| CM203 | ||
| CM204 | ||
| CM204SS | ||
| CM206 | ||
| UT018-5 (retired) |
Additional Compatibility Information
Enclosure Brackets
Mast
The “-MM” mount option for our environmental enclosures is intended for mounting the enclosure to a tripod's mast. An enclosure ordered with this option will be shipped with a three-piece bracket mounted to the top of the enclosure and an identical three-piece bracket mounted to the bottom of the enclosure.
Leg Base
All of our standard enclosures (including the ENC16/18) can be mounted to the CM106's leg base. The "-LM" mount option for our environmental enclosures allows the enclosure to be attached to the leg base of the CM106. This option includes a metal flange, two brackets, and a 2.5" u-bolt. The brackets attach to the right and left side of the enclosure, and the flange attaches to the tripod near the mast. The flange fits into a notch in one of the brackets, and the other bracket connects to a tripod leg via the u-bolt.
相关技术文档
常见问题解答
CM106: 3
展开全部收起全部
-
Refer to the CM106B Tripod Instruction Manual, which offers a “Tools List” section, as well as a detailed “Tripod Installation” section.
-
To provide additional support for the mast in areas that experience high wind speeds, order the optional guy kit for the CM106 (pn 27117). Refer to the Specifications information on the CM106 product page, which describes a guy kit’s effect on the “Maximum Allowable Sustained Wind” and the “Maximum Allowable Wind Gust” of a CM106.
-
With regard to height, these two mounting structures are similar:
- The UT10 tower supports a 10 ft measurement height.
- The CM106B tripod is adjustable from 7 to 10 ft.
There are some notable differences:
- The UT10 tower has a smaller footprint and is generally preferred when concrete (approximately 1 cubic yard) is available at the site.
- If a CM106B tripod is guyed and has its mast extended, the tripod’s maximum allowable sustained wind is 100 mph. In comparison, the UT10’s wind load recommendation is a maximum of 110 mph.