CM230 可调倾角固定支架
无
气象 应用支持 水资源 应用支持 能源 应用支持 湍流通量 应用支持 基础结构/工业设施 应用支持 土壤 应用支持

概览

CM230是可调节的固定支架，适合将定向天线或传感器固定到特定目标上。可以从水平到垂直之间任意调节倾斜角，支持向上朝向的天线、向下朝向的红外温度计或雪深传感器的安装。

图像

Included hardware of the CM230
Included hardware of the CM230
Included hardware of the CM230
CM230 with poles (sold separately)
CM230 attached to an antenna (sold separately)
CM230 attached to an antenna (sold separately)
CM230 attached to an antenna (sold separately)
CM230 attached to an antenna (sold separately)
CM230 attached to an antenna (sold separately)
CM230 attached to a rain gage (sold separately)

技术说明

CM230通常安装我们的三脚塔的主桅杆上或直立塔上，或在某些应用中安装到用户提供的管上（见兼容列表）。

产品规格

Material 12 gage, 304 stainless steel
Wind Can withstand 241.4 kph (150 mph) wind with ice
Dimensions 7.62 x 9.53 x 8.89 cm (3.0 x 3.75 x 3.5 in.)
Weight 0.34 kg (0.75 lb)

兼容性

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

固定设备

Product Compatible Note
CM202
CM202SS
CM203
CM204
CM204SS
CM206

Additional Compatibility Information

The CM230 will accept antennas and sensors with a 1.0 in. to 1.5 in. outer diameter. The bracket can be attached to a mast or pipe with a 1.3 in. to 2.1 in. outer diameter. The declination of the antenna is fixed when the U-bolts attached to the tripod are tightened; the inclination of the antenna or sensor can then be adjusted with the other set of U-bolts and nuts.

Pipe

The CM230 is compatible with a 0.75 to 1.0 in. pipe size (1 to 1.5 in. OD) on the adjustable-angle side and a 0.75 to 1.5 in. pipe size (1 to 2 in. OD) on the fixed-angle side.

列在

Other Accessory for the following products:
Common Accessory for the following products:
Replacement Part for the following products: