CM230XL是可调节的固定支架,适合将定向天线或传感器固定到特定目标上。可以从水平到垂直之间任意调节倾斜角,支持向上朝向的天线、向下朝向的红外温度计或雪深传感器的安装。
CM230XL通常安装我们的三脚塔的主桅杆上或直立塔上,或在某些应用中安装到用户提供的管上(见兼容列表)。
严格的重量限制保证目标安全地安装在CM230XL固定支架上。当CM230XL固定到垂直管上,目标重量必须小于11 kg;当固定到水平管上或水平朝向时,目标重量必须小于4 kg。
Wind | Can withstand 241.4 kph (150 mph) wind |
Material | 304 stainless steel |
Material Thickness | 12 gauge |
Sensor/Antenna Weight Limits |
|
Length | 47 cm (18.5 in.) |
Width | 7.6 cm (3 in.) |
Weight | 0.61 kg (1.35 lb) |
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
The CM230XL will accept antennas and sensors with a 1.0 in. to 1.5 in. outer diameter. The bracket can be attached to a mast or pipe with a 1.0 to 2.1 in. outer diameter. The declination of the antenna is fixed when the U-bolts attached to the tripod are tightened; the inclination of the antenna or sensor can then be adjusted with the other set of U-bolts and nuts.
The CM230XL is compatible with a 0.75 to 1.0 in. pipe size (1 to 1.5 in. OD) on the adjustable-angle side and a 0.75 to 2 in. pipe size (1 to 2.375 in. OD) on the fixed-angle side.