CM216提供了一根3/4- 或 1-英寸-IPS规格的固定管,在主桅杆上方延长4英寸。CM216的管含有适配件,可以方便地连接传感器的1.05- 或 1.32-英寸-外径的接头(通常是风传感器);CM216固定到CM110、CM115或CM120型的不锈钢三脚塔的顶端。
注意: CM216与铝材质的CM110-系列三脚塔不兼容,铝材质三脚塔在2007年3月之前发运。 CM215支架适合于铝材质三脚塔。 |
Reach | Extends 10 cm (4 in.) above the mast |
Outer Diameter | 2.67 to 3.34 cm (1.05 to 1.315 in.) |
Pipe Size | 1.9 to 2.54 cm (0.75 to 1 in.) IPS |
Dimensions | 20.32 x 7.62 x 5.08 cm (8 x 3 x 2 in.) |
Weight | 952.54 g (2.1 lb) |
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Product | Compatible | Note |
---|---|---|
CM10 (retired) | ||
CM106 (retired) | ||
CM106B | ||
CM110 | The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods. | |
CM115 | The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods. | |
CM120 | The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods. | |
CM6 (retired) | ||
QST6 |
A lightning rod cannot be used when this mount attaches a Wind Monitor or a 03002 Wind Sentry atop the tripod’s mast. Therefore the CM216 is only recommended for mounting a Wind Monitor or 03002 if the deployment is short-term.
The CM216 is compatible with sensors that have a 0.75 or 1 in. size (1 or 1.32 in. OD) pipe mount.