ENC100为较小的宽6.7英寸高5.5英寸的机箱,设计用于容纳大气压传感器。含有:底板、螺纹穿线孔、通风口和固定托架。还可兼容其它较小的传感器或外设。
ENC100一般用于安放大气压传感器。含有一个螺纹穿线孔用于引出线缆,通风孔用于平衡内外气压,底板用于固定大气压传感器(或其它小的设备),以及固定硬件,可将ENC100固定到三脚塔、直立塔或立杆。
Color | White |
Construction | Polycarbonate |
Backplate | Prepunched with one-inch-on-center holes |
Dimensions |
|
The ENC100 can house one small device (typically a barometer).
ENC100: 3
展开全部收起全部
Either the CS100 or the CS106 can fit inside an ENC100. For more information, refer to the Specifications information on the ENC100 product page.
There is not an easy way to calculate how much desiccant is needed in an enclosure or how quickly the desiccant will need to be replaced. The following conditions affect the replacement interval:
It may be advantageous to use more than one desiccant packet at a time inside an enclosure. Campbell Scientific recommends keeping an extra supply of desiccant on hand for as-needed replacement in the enclosure.
The desiccant should be replaced when the top colored dot on the humidity indicator card (pn 28878) turns pink; the humidity indicator card is included in the enclosure supply kit that is shipped with each enclosure. If the CS210, Enclosure Humidity Sensor, is used, replace the desiccant when the measured humidity exceeds 35%.