所有常见问题(1980 total: showing 1761-1780)
- When no excitation is commanded, are the voltage excitation ports on the data logger isolated from the data logger ground?
- Instead of saving the data of a CRBasic data logger to one large file, how can it be saved in daily, hourly, or half-hourly files?
- If a computer does not have any serial ports, how can software (such as LoggerNet, PC400, PC200W, or Device Configuration Utility) talk to the data logger?
- 可以使用数据采集器来切换控制外部设备打开或关闭吗？
- If a device or sensor is not available for selection in the Short Cut program, how can it be added?
- 如果传感器接线到错误的端口上，数据采集器能够被损坏吗？
- How can a floating point value be cast as a long integer?
- How can data that has been transmitted from a data logger to LoggerNet then be transmitted to a webhost that displays the data graphically?
- Is there a way to only record measurements during the daytime and put the data logger in sleep mode during the nighttime to conserve power?
- What is checked during the calibration of a Campbell Scientific data logger?
- Is it possible to use LoggerNet Admin software to connect to, and display data from, multiple data loggers?
- 数据采集器可以被放置在一个防水的机箱之中吗？
- What does the PreserveVariables instruction do?
- 多于一个 SDM 设备能够被连接到数据采集器吗？
- Campbell Scientific 的数据采集器能够通过远程通讯设备，进行远程数据下载、检查参数等等操作吗？
- Can binary data be received via the serial terminal of a data logger?
- What might cause a CRBasic data logger to stop storing data?
- How can the amount of time before the memory of a data logger is filled be calculated?
- What are the rules regarding when data is deleted from a data logger?
- What is a USR drive?
上一页
下一步