没有提供图片

概览

6182是包含在PS100和PS200供电电源中的内部7-Ahr密封可充电电池。这种电池是可更换部件。

技术说明

在2003年秋季,6182电池被少许改进,现在的特性包括17200号线缆连接此电池到供电电源上。17200电缆配有易插接头,可方便地接到蓄电池的接线电极上(在早期的设计中,导线焊接到电极上)。重新设计允许电缆的断开和更换。

产品规格

Output Voltage 12 Vdc
Nominal Rating 7 Ah
Weight 2.72 kg (6 lb)

兼容性

The 6182 is used with the PS100 and PS150 power supplies.

常见问题解答

6182: 7

展开全部收起全部

  1. Look for a stamp on top of the battery. The stamp may be in a date format of YYMMDDXX where:

    • YY is the year.
    • MM is the month.
    • DD is the day.
    • XX is the manufacturing plant.

    This indicates the age of the battery.

  2. Check with the airline. Mention that the 6182 is a sealed, valve-regulated lead-acid (VRLA) battery.

  3. The 6182 and 17894 are valve-regulated lead-acid (VRLA) maintenance-free batteries, also known as sealed, lead-acid batteries.

  4. This depends on the current drain of the system. In general, the battery can be made to last longer by following these steps:

    1. Just before measuring the high-current sensors, slow down the scan interval of the data logger program and switch on the sensors.
    2. Just after the sensors stabilize, take the measurements.
    3. Turn the sensors off immediately.

    Communication can also greatly affect the battery charge. Turn off any communications devices as much as possible to delay the battery discharge. 

    Adding a solar panel and working out a power budget can balance out the charge with the discharge so that the system can be stable indefinitely. For more information, see the “Power Supplies” application note.

  5. To replace the battery (pn 6182), follow these steps:

    1. Turn off and disconnect the power to the PS100.
    2. Unlatch and slide off the cover.
    3. Disconnect the battery clip.
    4. Lift out the old battery, and slide in the new battery. 
    5. Reconnect the power, and turn the PS100 on.