BP12 可充电电池组,12 V, 12 Ah,为Campbell Scientific系统供电,拥有超乎寻常的供电能力,例如可为卫星发射器供电。
BP12 需要充电电源(通常由CH200,CH100连接到不是很稳定的太阳能电池板上,或接到交流转直流适配电源上。)BP12包括12英寸线缆,其末端可连接在CH100或CH200充电保护器上。BP24带有支架,使其可固定在机箱底板上,ENC16/18机箱比较适用。
Battery Type | Sealed lead acid (SLA) |
UL Approval File Number | MH16464 |
Output Voltage | 12 Vdc |
Nominal Rating | 12 Ah |
Battery Cables Length | 0.6 m (2 ft) |
Dimensions for Battery Alone | 15.1 x 9.8 x 9.7 cm (5.94 x 3.86 x 3.82 in.) for length x width x height |
Dimensions for Battery with Mounting Bracket | 16.8 x 10.4 x 10.0 cm (6.61 x 4.10 x 3.94 in.) for length x width x height |
Weight | 4.4 kg (9.8 lb) |
BP12: 6
展开全部收起全部
Yes. It is a good idea to fully charge the BP12 with the CH100/CH200 before deployment.
Look for a stamp on top of the battery. The stamp may be in a date format of YYMMDDXX where:
This indicates the age of the battery.
Yes. These leads are pn 22024, Battery Cable.
The discrepancy is not a mistake—the bracket is intentionally designed to be shorter than the battery. When mounted inside an enclosure, the back of the battery rests against the mounting grommets. The lid to the mounting bracket compresses the battery slightly, holding the battery firmly in place.
Trickle chargers and float chargers vary. It is possible to do this, but ensure that the regulator voltage will match the battery specifications [13.65 V – (18 mV) x (T-25°C)] for float charging.