可容易而安全地安装Campbell的产品
概览
ENC12/14为中等尺寸的耐候机箱，宽12英寸，高14英寸。它是我们标准机箱系列中最常用的一种，价格合适且空间大小也合适。可容纳一个数据采集器，一个供电电源和一个或更多的外设，视情况而定。
请注意，机箱不包括接地线。
优势与特点
- 耐候，保护设备
- 专门设计的底板，易于安装和紧固Campbell Scientific组件
- 白色的抗紫外机箱反射了太阳辐射 — 减少了机箱内的温度梯度，不需要别的防辐射措施
图像
3D/CAD 文件：
技术说明
ENC12/14机箱内的底板以1/2英寸等间距的网格预先打好了孔，适合安装数据采集器、供电电源、以及通讯或测量控制外设。
ENC12/14发运时带有7363机箱配件包，含有干燥剂、湿度指示卡片、绑扎线、固定线缆粘块、灰泥、护线套、螺丝、PVC耦合连接。另外，Campbell Scientific供应CS210机箱内湿度传感器用于监测机箱内的相对湿度（见订货信息）。
产品规格
| Color | White (Reflects solar radiation, reducing temperature gradients inside the enclosure without using a separate radiation shield.) |
| Construction | Fiberglass-reinforced polyester enclosure with door gasket, external grounding lug, stainless-steel hinge, and lockable hasps |
| Enclosure Classification | NEMA 4X (before being modified for cable entry, conduit, or ground lug) |
| Number of Cable-Entry Seals | 2 medium, 4 small |
| Dimensions |
|
| Weight | 5 kg (11.2 lb) |
兼容性
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
数据采集器
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | ||
| CR10X (retired) | ||
| CR200X (retired) | ||
| CR206X (retired) | ||
| CR211X (retired) | ||
| CR216X (retired) | ||
| CR23X (retired) | ||
| CR295X (retired) | ||
| CR300 | ||
| CR3000 (retired) | ||
| CR350 | ||
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | ||
| CR6 | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000 (retired) |
常见问题解答
ENC12/14: 15
展开全部收起全部
-
The ENC12/14 weighs 11.2 lb. Its internal dimensions are 12 x 14 x 5.5 in.
-
If you purchased a Stahlin enclosure from Campbell Scientific and it has a failed gasket, we can help you. We will need you to provide an image of the failed gasket, verify the size of your enclosure, and provide your contact information. We can then arrange to have a replacement gasket sent to you from Stahlin. For assistance, contact Technical Support at 435.227.9100.
-
The terminals do not need to be replaced. Just sand or file the corrosion away, exposing clean copper, and the fittings will continue to be functional.
-
Is a fiberglass enclosure suitable for an installation in a very cold location monitoring corrosion?Our fiberglass enclosures can withstand very cold locations, and their fiberglass/plastic construction is very resistant to corrosion.
-
It depends on the device. Most devices have built-in mounting flanges, but some items require a separate mounting bracket.
-
是。Campbell Scientific 所销售的每一个防护机箱都含有一个亚光处理的背板，背板钻有按1 英寸间距分布的孔，匹配我们设备的安装用法兰，使得安装过程非常轻松便捷。
-
The following information is applicable to many of Campbell Scientific’s standard enclosures and prewired enclosures.
Note: The procedure below will not work for torn or damaged seals.
To make a field repair to a loose gasket on an enclosure, first acquire an adhesive, such as standard Gorilla Glue, that is rated for use with polyurethane foam. The adhesive should be compatible with, and recommended for, use with polyurethane foam. Follow these steps:
- Pull the gasket away from the gasket channel, being careful not to tear the gasket. The gasket does not need to be removed completely. Rather, remove only those areas that have pulled loose on their own. To keep the gasket up out of the way, lay a small object (such as a toothpick, pen, or pencil) horizontally across the channel.
- Using an adhesive that is rated for use with polyurethane foam, apply a small bead of adhesive to the gasket channel. Because the adhesive’s only function is to keep the gasket in place, use it sparingly.
- Remove any objects that were holding the gasket out of the way.
- Carefully place the gasket in the gasket channel.
- Wait 1 to 3 hours for the adhesive to cure before closing the door.
-
-
是。在我们网站中的机箱页面下的订购栏中 (Ordering tab) 中，向下滚动找到备件区域 (Replacement Parts) ，那里列有用于该型号机箱的通用背板。
案例研究
As part of the United Nations Development Programme's (UNDP) Crisis Prevention and Resilience Building component,......阅读更多