概览
The SR05-L, manufactured by Hukseflux Thermal Sensors as the SR05-D1A3, is an ISO 9060:2018 spectrally flat Class C (second class) pyranometer designed for general solar radiation measurements in agricultural and meteorological networks and PV monitoring. Both analog output and Modbus over RS-485 are supported.
优势与特点
- Industry-standard analog and digital outputs for easy implementation and servicing
- Affordable second class pyranometer, suitable for large networks
- Employs a thermopile sensor with black-coated surface, one dome, and an anodized aluminum body with visible bubble level
图像
相似产品
技术说明
The SR05 measures solar radiation received by a plane surface, in W/m², from a 180° field of view angle with a high-quality blackened thermopile protected by a glass dome. The blackened thermopile provides a flat spectral response for the full solar spectrum range, which allows the SR05 to be used under plant canopies or lamps, when the sky is cloudy, and for reflected radiation measurements.
The SR05 produces two different outputs that are measured directly by a Campbell Scientific data logger: a 0 to 1000 mV signal and a Modbus over RS-485 signal.
产品规格
| Sensor | Blackened thermopile protected by a dome |
| Measurement Description | Measures hemispherical solar radiation |
| Heater | No |
| ISO Classification | Spectrally flat Class C (second class) ISO 9060:2018 |
| IEC 61724-1:2017 Compliance | Class C |
| Digital Output | Modbus over two-wire RS-485 |
| Voltage Output | 0 to 1 V |
| Analog Output | 0 to 1600 W/m2 |
| Calibration Uncertainty | < 1.8% (k = 2) |
| Calibration Traceability | To WRR |
| Spectral Range | 285 to 3000 x 10-9 m |
| Operating Temperature Range | -40° to +80°C |
| Rated Operating Voltage Range | 5 to 30 Vdc |
| Communication Protocol | Modbus over RS-485 |
| Transmit Range | 0 to 1600 W/m2 |
| Power Consumption (Digital) | < 75 x 10-3 W (at 12 Vdc) |
下载
SR05 Example Programs v.1 (2 KB) 10-09-2021
Two CR1000X data logger programs that read the SR05 sensor. An example program is included for each output option (digital Modbus, analog). Although these programs are written for a CR1000X data logger, program code for other data loggers will be similar.