停产的 ›
这个产品是无效的且被替换: CS456.
CS420-L Druck PDCR 1830-8388 Submersible Pressure Transducer
Services Available
Repair No
Calibration No
Free Support No

概览

The CS420 was manufactured by Druck for use in surface, groundwater, or hostile fluid applications. It was quite similar to the CS425 (retired also), but offered increased static accuracy. The sensor's accuracy was ±0.1% FS, BSL (combined non-linearity, hysteresis, and repeatability). The CS420 featured a titanium body with an isolated diaphragm and NEMA6 (IP68) ingress protection to 2300 feet of water.

图像

技术说明

The CS420 was removed from our pricing system on December 5, 2008.

产品规格

Output Voltage
  • 25 mV for 1 psig range
  • 50 mV for 2.5 and 5 psig ranges
  • 100 mV for ranges 10 psig and above
操作温度范围 -2° to +30°C (compensated)
Diameter 2.0 cm (0.8 in.)
Length 10.2 cm (4.0 in.)
Weight 1.36 kg (3 lb)

兼容性

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

数据采集器

Product Compatible Note
21X (retired)
CR10 (retired)
CR10X (retired)
CR200X (retired)
CR206X (retired)
CR211X (retired)
CR216X (retired)
CR23X (retired)
CR295X (retired)
CR3000 (retired)
CR3000 (retired)
CR500 (retired)
CR5000 (retired)
CR510 (retired)
CR800 (retired)
CR850 (retired)
CR9000 (retired)

Additional Compatibility Information

Data Logger Considerations

Excitation voltage from the data logger and either one (four-wire gages) or two (six-wire gages) differential channels are required. Four wires can be used where cable lengths are short; six wires compensate for excitation voltage loss on long cables, thereby improving accuracy.

PST System

The CS420 is NOT compatible with the PST system. [Underwater connectors for vented transducers are available. Contact Druck for pricing and details.]