LWS 叶片湿度传感器能探测在传感器表面上的小量的水或冰。设计用于部署在冠层里,或气象站的主桅杆上。我们所有的数据采集器都能测量LWS的输出信号。
LWS 测量传感器上表面的介电常数。这种方法允许传感器检测传感器表面上任何位置的水或冰的存在。
| Measurement Description | Dry, frosted, wet |
| Signal Type/Output | Analog voltage |
| Measurement Time | 10 ms |
| Power | 2.5 Vdc @ 2 mA to 5 Vdc @ 7 mA |
| Output | 250 to 1500 mV (millivolt reading relates to moisture state) |
| Operating Temperature Range | -40° to +60°C |
| Life Expectancy | 2+ years (continuous use) |
| Painting | Does not require painting. |
| Dimensions | 12.0 x 5.8 x 0.8 cm (4.7 x 2.3 x 0.3 in.) |
| Weight | 0.14 kg (5 oz) with 4.57 m (15 ft) cable |
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
| Product | Compatible | Note |
|---|---|---|
| CR1000X (retired) | ||
| CR300 (retired) | ||
| CR3000 (retired) | ||
| CR310 | ||
| CR350 | ||
| CR6 | ||
| CR800 (retired) | ||
| CR850 (retired) |
The LWS is designed to be deployed either in the canopy or on a weather station mast. Two holes in the non-sensing portion of the sensor body are provided for attaching the sensor to a pole or branch via twist ties or with 4-40 bolts.
LWS-L: 4
展开全部收起全部
Both leaf wetness sensors are compatible with all Campbell Scientific data loggers. However, the 237-L is often used in large legacy networks that rely on the 237-L for data continuity. The 237-L does require painting and field calibration, whereas the LWS does not.