This product is not available for new orders.
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
概览
坎贝尔不再将OMNISAT-M作为标准产品销售。我们可以提供用于发射器的电源线、通讯线、固定套件、天线和天线磁性固定件。发射器应当从Signal Engineering 公司特别订购，因为我们每次订购数量的不同，价格会变化。
OMNISAT-M 卫星发射器用于METEOSAT 卫星系统，提供从数据收集平台（DCP）到接收站之间的单向通讯。支持的通讯波特率为300 和 1200 bps。
Meteosat 是地球静止气象卫星系统，由EUMETSAT （欧洲气象卫星应用组织）运营。地球静止卫星的轨道与地球自转同步，使得每一个卫星停留在地球上方的特定区域。EUMETSAT 是通过欧洲国家的国际会议创建的政府间机构。
图像
技术说明
OMNISAT-M 卫星发射器用于METEOSAT 卫星系统，提供从数据收集平台（DCP）到接收站之间的单向通讯。支持的通讯波特率为300 和 1200 bps。 这种发射器用于我们的CR800、CR850、CR1000和CR3000等数据采集器。
对于METEOSAT 卫星通讯来说，时钟精度至关重要，因此OMNISAT-N包含一个内置的GPS 接收器。GPS 接收器自动修正时钟和振荡器漂移。
METEOSAT 系统
Meteosat 是地球静止气象卫星系统，由EUMETSAT （欧洲气象卫星应用组织）运营。地球静止卫星的轨道与地球自转同步，使得每一个卫星停留在地球上方的特定区域。EUMETSAT 是通过欧洲国家的国际会议创建的政府间机构。
产品规格
- Weight: 59.5 g (2.1 oz.)
- Dimensions:
16.5 x 12.2 x 3.8 cm
(6.5” x 4.8” x 1.5”)
兼容性
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
数据采集器
| Product | Compatible | Note |
|---|---|---|
| CR200X (retired) | ||
| CR206X (retired) | ||
| CR211X (retired) | ||
| CR216X (retired) | ||
| CR295X (retired) | ||
| CR3000 (retired) | ||
| CR5000 (retired) | ||
| CR800 (retired) | ||
| CR850 (retired) |
Additional Compatibility Information
Environmental Enclosure
The transmitter should be housed in an ENC16/18 environmental enclosure. Customers can order the 19332 and 19336 Antenna Cable/Bulkhead accessories to have Campbell Scientific punch a special bulkhead hole in the enclosure and install 17” cables for the Yagi and GPS antennas.
Power Supply
Typical power supply is a BP24 24 Ahr battery, a CH100 regulator, and an SP20 solar panel. A user-supplied deep-cycle rechargeable battery should be used when it is difficult to replace the batteries or the system's power requirements are large. The deep-cycle rechargeable battery should have at least a 60-Ahr capacity, and be trickle-charged with a 20-W solar panel.
常见问题解答
OMNISAT-M: 1
-
To connect a data logger to an OMNISAT-M, use the RS-232 port of the data logger. Connection using the CS I/O port of the data logger will not be successful.