数据线缆 / SC-IRDA
停产的 ›
这个产品是无效的.
SC-IRDA CS I/O 红外接口
Services Available
Repair No
Calibration No
Free Support No

概览

SC-IRDA 是一款红外设备,不需打开机箱外壳,即可将手持PDA与数据采集器连接,通常放置在机箱的一侧。SC-IRDA 红外传感器密封防水,使其能够抵御曝晒,雨雪环境。

优势与特点

  • Allows PDA handheld to communicate with a data logger
  • Transmits at a distance of up to 8 inches

图像

技术说明

The SC-IRDA allows a PDA to communicate with a data logger housed inside an environmental enclosure without opening the enclosure's door. Typically this infrared device is placed in a compression fitting that has been added to the side of an enclosure. The SC-IRDA is sealed against moisture allowing it to withstand exposure to rain or snow.

产品规格

Power Supplied by data logger 5 V (on CS I/O port)
Typical Current Drain
  • 0.17 mA (standby)
  • 6.2 mA (active)
Baud Rate
  • 9600 (default)
  • Rates up to 19200 selectable via software.
Communication Range Up to 20 cm (8 in.) with typical lighting
Acceptance Angle 30º
Communication Standard Communication conforms to the IRDA low-power SIR standards (specifications as supported by most Palm PCs and laptops)
PDA Handheld Requirements Must have an IRDA sensor and an infrared chipset compatible with the SC-IRDA.
CE Compliance Complies with EMC standard EN61326:1996.

兼容性

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

数据采集器

Product Compatible Note
21X (retired)
CR10 (retired)
CR10X (retired)
CR200X (retired)
CR206X (retired)
CR211X (retired)
CR216X (retired)
CR23X (retired)
CR295X (retired)
CR3000 (retired)
CR3000 (retired)
CR500 (retired)
CR5000 (retired)
CR510 (retired)
CR800 (retired)
CR850 (retired)
CR9000 (retired)