停产的 ›
这个产品是无效的.
200P Wind Direction Sensor
Services Available

概览

NRG's 200P wind direction vane is commonly used in wind prospecting applications. The thermoplastic and stainless steel components resist corrosion and contribute to a high strength-to-weight ratio. The vane is connected to a precision conductive plastic potentiometer located in the main body. An analog voltage output directly proportional to the wind direction is produced when a constant DC excitation voltage is applied to the potentiometer. A rubber terminal boot is included.

图像

产品规格

Sensor Vane
Measurement Description Wind direction
Measurement Analog potentiometer (half bridge)
Range 0° to 360°
Operating Temperature Range -55° to +60°C
Starting Threshold 1.0 m/s (2.2 mph)
Swept Diameter 27 cm (10.5 in.)
Length 21 cm (8.3 in.)
Height 12 cm (4.3 in.)
Weight 0.14 kg (0.3 lb)

兼容性

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

数据采集器

Product Compatible Note
21X (retired)
CR10 (retired)
CR10X (retired)
CR200X (retired)
CR206X (retired)
CR211X (retired)
CR216X (retired)
CR23X (retired)
CR295X (retired)
CR3000 (retired)
CR500 (retired)
CR5000 (retired)
CR510 (retired)
CR800 (retired)
CR850 (retired)
CR9000 (retired)

Additional Compatibility Information

Data Logger Considerations

The Wind Vane requires one single-ended channel and access to an excitation channel (the excitation channel can be shared with other high impedance sensors).

Programming

The wind vane is measured by the BrHalf Instruction in CRBasic and by Instruction 4 (Excite-Delay-SE) in Edlog. The measurements are typically processed for output with the Wind Vector Instruction (not present in the CR500 or CR9000).

常见问题解答

200P: 1

  1. Using Short Cut, how can the average wind direction be calculated?
    1. Using Short Cut, click the applicable wind direction sensor in the Selected Sensors list of the Outputs screen.
    2. The two output options enabled are Sample and WindVector. Select WindVector.
    3. The WindVector instruction has output options. Select an option with mean wind direction in it.
访问常见问题解答资料库