RA100-L 频闪灯和汽笛警报器
声音和
视觉警报

用于闪电
预警系统
气象 应用支持 水资源 应用支持 能源 应用支持 湍流通量 应用支持 基础结构/工业设施 应用支持 土壤 应用支持

概览

RA100 远程频闪和汽笛警报器可提供声光警报信号,或状态条件。红色/琥珀色/蓝色频闪灯是SAE 二级LED,可闪烁达100,000 小时寿命级别,在12.8 Vdc电压下平均电流消耗 0.26 A,但通常是亮3秒,灭120秒,使得平均电流消耗下降到少于0.02 A。警报器固定在58 英寸的铝管上,铝管表面涂有铬化镀层和黑色粉末涂层,外观醒目,使用更持久。

优势与特点

  • SAE Class II LED beacons with 100,000 hour rated lifetime
  • 125 dB ± 2 dB at 0.3 m (1 ft) siren
  • Low power consumption
  • Rugged construction
  • Easily powered and controlled by a Campbell Scientific data logger and the SDM-CD8S 8-Channel Solid-State DC Controller
  • Includes two stainless-steel brackets for mounting to a flat surface
  • Optional pole-mount kit allows mounting to a pole with a 1.5 to 4 in. outside diameter
  • Optional 3.3 ft extension allows mounting to a parapet wall

图像

技术说明

RA100 通常是LW110 闪电预警系统或RA110 远程警报系统的一部分,它也可以单独订购用于很多应用。RA100可由坎贝尔数据采集器和SDM-CD8S 8-通道固态DC控制器轻松供电和控制。

产品规格

LED Beacons

Rated Lifetime 100,000 h
Colors Red, amber, blue
Current Drain
  • 0.65 A (peak) @ 12.8 Vdc
  • 0.26 A (average) @ 12.8 Vdc
Diameter 14 cm (5.5 in.)
Height 16.3 cm (6.4 in.)

Siren

Sound Output 125 dB ± 2 dB at 0.3 m (1 ft)
Operating Temperature Range -20° to +65°C (-4° to +149°F)
Operating Voltage 4.8 to 14.4 Vdc
Current Drain
  • 0.62 A (maximum)
  • 0.02 A (average)

Pole

Material Aluminum tubing with irridite and black powder coating
Dimensions 1.5 m x 7.6 cm x 3.8 cm (4.8 ft x 3.0 in. x 1.5 in.)

LED Backplate

Material Aluminum
Dimensions 19.1 x 30.5 x 30.5 cm (7.5 x 12 x 12 in.)

Siren Backplate

Material Aluminum
Dimensions 12.7 x 12.7 x 0.5 cm (5 x 5 x 0.2 in.)

Mounting Bracket for Mounting to Flat Surface

Material 12 gage stainless steel
Dimensions 13.9 x 4.0 x 3.2 cm (5.5 x 1.6 x 1.3 in.)

Extension Pole

Material Aluminum tubing with irridite and black powder coating
Wind Load 233.4 kph (145 mph) wind gust or 180.3 kph (112 mph) steady winds with a safety factor of 1.25

Assumes 158.8 kg (350 lb) pullout strength of the customer-supplied 0.635-cm (0.25-in.) expansion bolts, the top mounting bracket installed just below the joint, and the bottom mounting bracket mounted at least 0.61 m (2 ft) below the top bracket.
Dimensions 1.15 m x 7.6 cm x 3.8 cm (3.5 ft x 3.0 in. x 1.5 in.)

兼容性

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

数据采集器

Product Compatible Note
21X (retired)
CR10 (retired)
CR1000
CR10X (retired)
CR200X (retired)
CR206X (retired)
CR211X (retired)
CR216X (retired)
CR23X (retired)
CR295X (retired)
CR3000
CR500 (retired)
CR5000 (retired)
CR510 (retired)
CR800
CR850
CR9000 (retired) The CR9000 is compatible, but the RA100 requires the SDM-CD8S and the SCM-CD8S does not support the CR9000's fastest communication rates. Therefore, the RA100 is not practical for most of the CR9000's applications.
CR9000X The CR9000X is compatible, but the RA100 requires the SDM-CD8S and the SCM-CD8S does not support the CR9000X's fastest communication rates. Therefore, the RA100 is not practical for most of the CR9000X's applications.

Additional Compatibility Information

While the RA100 is typically part of the LW110 Lightning Warning System or the RA110 Remote Alarm System, it can be purchased as a stand-alone item for many applications.

Synchronous Devices for Measurement (SDMs)

An SDM-CD8S 8-Channel Solid-State DC Controller is required when the RA100 is not used in an LW110 or RA110 system. To communicate with connected SDM devices, the CR3000 and CR5000 use the SDM-C1, SDM-C2, and SDM-C3 ports. The other data loggers use ports labeled C1, C2, and C3. The 21X also requires channel 1H.


文章和新闻发布