太阳能板 / SP20
SP20 20 W Solar Panel

概览

The SP20 is a 20 W solar panel. It is often used for system configurations that have higher-than-average power requirements, or in higher elevation and latitude locations. It connects to Campbell Scientific power supplies and battery bases to recharge the battery, and it allows unattended operation of systems in remote locations that are far from ac electrical sources.

优势与特点

  • 给密封可充电电池充电，包括PS100、PS200、BP12（需要CH100或CH200）、BP24（需要CH100或CH200）、CR3000或CR5000
  • 在交流电不可靠、昂贵或者不可获得的站点，提供电源

图像

SP20 with attached 31108 extended mounting kit (sold separately)

技术说明

The SP20's 15-ft cable has stripped and tinned leads that connect to the PS150, PS200, CH150, CH200, or battery base of the CR3000, CR5000, CR7, CR9000X, CR6, or CRVW3. A 788 connector must be soldered onto the solar panel leads to use the SP10 with a 21XL rechargeable base.

Included mounting hardware consists of two part no. 17492 U-bolt and matching nuts. The U-bolt has a 5.398 cm (2.125 in.) space between the U-bolt legs. This hardware allows the solar panel to be mounted to a 0.75-1.5 in. IPS pipe [25.4-50.8 cm (1-2 in.) OD].

产品规格

-NOTE- Solar panel characteristics assume 1 kW m-2 illumination and 25°C solar panel temperature. Individual panels may vary up to 10%. The output panel voltage increases as the panel temperature decreases.
Cable Description 20 AWG, 1-twisted pair
Maximum Peak Power 20 W
Maximum Allowable Wind Gust Speed
  • Note: The wind ratings are for solar panels with the indicated mounts and do not account for strength of tower or tripod.
  • 44 m s-1 (99 mph) Standard mount
  • 58 m s-1 (130 mph) Extended mount
Guaranteed Minimum Peak Power 18 W
Current at Peak 1.19 A
Voltage at Peak 16.8 V
On-board Regulator Included No
Cable Length 4.572 m (15 ft)
Dimensions 50.0 x 42.2 x 5.1 cm (19.7 x 16.6 x 2 in.)
Weight 4.4 kg (9.6 lb)

兼容性

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

数据采集器

Product Compatible Note
CR300 The SP20 is compatible with the built-in regulator.
CR3000 (retired) (The SP20 is compatible with the built-in regulator.)
CR310 (The SP20 is compatible with the built-in regulator.)
CR350 The SP20 is compatible with the built-in regulator.
CR6 (The SP20 is compatible with the built-in regulator.)
CRVW3 (The SP20 is compatible with the built-in regulator.)

供电电源

Product Compatible Note
BP12
BP24
BP84
CH150
CH200
PS150 (The SP20 is compatible with the built-in regulator.)
PS200 (The SP20 is compatible with the built-in regulator.)

Additional Compatibility Information

Regulators

The SP20 is compatible with the CH150; the CH200; the CH201; or the regulator built into the PS150, PS200, CR6, CR3000, CR300, CR310, or CRVW3.

Batteries

The SP20 is compatible with the EnerSys Genesis NP series (such as PS150, PS200, BP12, BP24), EnerSys Cyclone series, or Concorde Sun Xtender series (such as BP84) batteries.

视频与教程

常见问题解答

SP20: 3

展开全部收起全部

  1. Is a longer cable available for a SP20-series solar panel? Can just a longer cable be purchased?

    The supplier of the SP20-series solar panels changed the wiring connections so that it is no longer possible to lengthen the cables without a splice. Splices can increase the risk of water penetrating the cable, so Campbell Scientific generally recommends not lengthening the cable. However, we can lengthen the cable upon special request. Contact us to discuss this further.

  2. Can an SP20 or SP20-PW solar panel and a CH100 be used to charge a flooded lead-acid battery (marine type)?

    The CH100 Charge Controller is designed to work with maintenance-free deep-cycle lead-acid batteries. The voltage of the charger is slightly different than what is required to charge the marine-type flooded-cell battery. Therefore, Campbell Scientific recommends purchasing a deep-cycle battery, such as the BP12 or BP24, rather than a flooded-cell battery. Note that our regulated solar panels, such as the SP20R and SP10R, are intended to be used with, and connected directly to, a user-supplied flooded battery.

  3. Is a regulator needed with an SP5-L, SP10, SP10-PW, SP20, or SP20-PW?

    Regulators control the current flowing to the battery and prevent the battery current from flowing to the charging source. These solar panels do not include an on-board voltage regulator, so a stand-alone regulator would be required to complete a power supply.

    Typically, these solar panels are connected to a CH100, CH200, PS100, or PS200, as well as to the battery base of a CR3000 or CR5000. The PS100 and the PS200, as well as the battery base of the CR3000 and CR5000, include an internal regulator.

访问常见问题解答资料库