这个产品是无效的且被替换: CS456.
| Services Available | |
|---|---|
| Repair | No |
| Calibration | Yes |
| Free Support | No |
概览
CS455 压力传感器适用于监测运河、水井、池塘、港口、湖泊和溪流等的水位，钛金属外壳可置于咸水和其它腐蚀环境中。CS455可输入SDI-12信号也可输出 RS-232信号，得到压力和温度，我们的数据采集器多数都可接收这些信号。
优势与特点
- Rugged titanium case protects piezoresistive sensor allowing it to be used in saltwater and other harsh environments
- Quality construction ensures product reliability
- Low-power sleep state between measurements reduces power consumption
- Fully temperature-compensated
- Optional weighted nose cone facilitates submersion
- Compatible with most Campbell Scientific data loggers
- NPT fitting allows it to be used in closed-pipe applications
- Quick shipment after receipt of order (ARO)
- Compatible with the A150 Desiccated Case, which allows it to be connected to the CWS900 and used in a wireless sensor network
图像
技术说明
The CS455 consists of a piezoresistive sensor and a temperature sensor housed in a titanium case. It has a rugged Hytrel cable that remains flexible, even under harsh environmental conditions. The cable incorporates a vent tube to compensate for atmospheric pressure fluctuations. The vent tube terminates inside a desiccant tube, which prevents water vapor from entering the inner cavity of the transducer.
The CS455 has several pressure range options and two accuracy options (see Ordering Info). The standard accuracy option provides ±0.1% FS TEB over the 0° to 60°C temperature range. The high accuracy option provides ±0.05% FS TEB over the 0° to 60°C temperature range and includes a calibration certificate. TEB is the combined errors due to nonlinearity, hysteresis, non-repeatability, and thermal effects over the compensated temperature range, per ISA S51.1. Please note that the high accuracy option is not available for the 0 to 2.9 psig range option.
Campbell Scientific offers the A150 Desiccated Case that allows the CS455 to be connected to a CWS900 Wireless Sensor Interface (for use in a wireless sensor network) or to be connected to a prewired enclosure (see Ordering Information).
产品规格
| Measurement Time | < 1.5 s |
| Outputs | SDI-12 (version 1.3) 1200 bps; RS-232 9600 bps |
| Resolution | 0.0035% FS |
| Operating Temperature | -10° to +80°C |
| Compensated Temperature | 0° to 60°C |
| Temperature Accuracy | ±0.2°C |
| Overpressure | 2 x pressure range |
| Power Requirements | 6 to 18 Vdc |
| Accuracy with Standard Accuracy Option | ±0.1% FS TEB (Includes the combined errors due to nonlinearity, hysteresis, nonrepeatability, and thermal effects over the compensated temperature range, per ISA S51.1.) |
| Accuracy with High Accuracy Option | ±0.05% FS TEB (The high accuracy [±0.05% FS] option is not available for the 0 to 2.9 psig range option.) |
| Cable Type | Hytrel Jacket, five conductor, 26 AWG |
| NPT Fitting | 1/4-in. NPS |
| Top Cone Material | Delrin |
| Body Material | Titanium |
| Element Material | Hastelloy |
| Diameter | 2.13 cm (0.84 in.) |
| Length | 21.34 cm (8.4 in.) |
| Distance |
|
| Weight without Cable | 0.11 kg (0.25 lb) |
| Cable Weight | 0.421 kg/m (0.283 lb/ft) |
| Weight | 0.211 kg (0.465 lb) for 25414 Weighted Nose Cone |
Power Consumption |
|
| Quiescent | < 80 µA |
| Measurement/Communication | 8 mA (1-s measurement) |
| Maximum | 40 mA |
Pressure Measurement Range |
|
| Option -2 | Up to 2.9 psig (20 kPa) |
| Option -7 | Up to 7.25 psig (50 kPa) |
| Option -14 | Up to 14.5 psig (100 kPa) |
| Option -29 | Up to 29 psig (200 kPa) |
| Option -72 | Up to 72.5 psig (500 kPa) |
| Option -145 | Up to 145 psig (1000 kPa) |
Depth of Fresh Water Measurement Range |
|
| Option -2 | Up to 2.0 m (6.7 ft) |
| Option -7 | Up to 5.1 m (16.7 ft) |
| Option -14 | Up to 10.2 m (33.4 ft) |
| Option -29 | Up to 20.4 m (67 ft) |
| Option -72 | Up to 50.9 m (167 ft) |
| Option -145 | Up to 102 m (334.5 ft) |
Maximum Cable Length |
|
| SDI-12 (1 sensor connected to a single port) | ~457 m (1500 ft) |
| SDI-12 (10 sensors connected to a single port) | 60 m (200 ft) |
| RS-232 | 60 m (200 ft) |
兼容性
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
数据采集器
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | ||
| CR10X (retired) | ||
| CR200X (retired) | ||
| CR206X (retired) | ||
| CR211X (retired) | ||
| CR216X (retired) | ||
| CR23X (retired) | ||
| CR295X (retired) | ||
| CR3000 (retired) | ||
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000 (retired) |
Additional Compatibility Information
Desiccated Case
The CS455 can be used with the A150. The A150 is a small, self-contained junction box that allows the CS455 to be connected to a continuation cable, a prewired-enclosure connector, or a CWS900-series wireless-sensor connector. Connection to a CWS900-series interface allows the CS455 to be part of a wireless sensor network.
常见问题解答
CS455-L: 6
展开全部收起全部
-
The CS45x-series pressure transducers are suitable for monitoring lake levels. However, be sure to submerge the pressure transducer below the frost line. If ice forms against the diaphragm, it will deform the diaphragm and cause permanent damage.
-
No. Because of the SDI-12 protocol, the CS45x-series pressure transducers can only make measurements every 1.5 seconds.
-
No. To prevent damage to the pressure transducer, it must be removed if freezing is anticipated.
-
Yes, but a data logger is required. The CS45x-series pressure transducers are not autonomous. They require a data logger to initiate and retrieve a measurement. The data logger can initiate an event-based measurement.
In contrast, the CRS45x-series water-level recording sensors support event-based recording using built-in data-collection features.
-
No. A data logger must be used with the CS45x-series pressure transducers.
-
No. The A200 is only used to configure the CS451 and CS456 pressure transducers.