CR1000KD 用于CR1000（X）、CR800或CR6的键盘显示器
结实的
易于使用
必要的野外工具
气象 应用支持 水资源 应用支持 能源 应用支持 湍流通量 应用支持 基础结构/工业设施 应用支持 土壤 应用支持

概览

CR1000KD是用于CR1000、CR1000X/Xe、CR800、CR850和CR6的便携式键盘显示器，可以让您检查数据采集器的状态、显示或绘图传感器的读数、存储数值以及输入数值或更改端口/标志的状态。CR1000KD可以方便地从数据采集器网络中的一个站点带到另一个站点。

优势与特点

  • Can be easily moved from data logger to data logger
  • Supports custom menus and displays to simplify routine operations

图像

3D/CAD 文件：

CR1000KD 2D (DXF)

技术说明

CR1000KD为带背光的128×64像素绘图式或8行数值显示的LCD显示器，和一个16键的键盘；由数据采集器供电，使用SC12线缆可以把CR1000KD连接到数据采集器，SC12的两个接头中的另外一个可以同时连接别的外设。

CR1000KD支持自定义菜单，方便用户通过简单切换或选取列表，来初始化数据采集器程序的选项设置功能。（例如：初始化传感器校准程序 相对于 绕开传感器校准程序。）

没有专门的CR1000KD说明书，CR800/CR1000/CR6数据采集器的说明书中有关于CR1000KD操作的描述。

产品规格

Temperature Range -20° to +50°C (operating)
Display/Keyboard Description 8 lines x 21 characters (64 x 1238 pixels) display and 16-character keyboard
Dimensions 10.2 x 15.2 x 1.5 cm (4.0 x 6.0 x 0.6 in.)
Weight 272 g (10 oz)

Current Drain
Quiescent Negligible
Active
  • 7 mA (without backlight)
  • 100 mA (with backlight)

兼容性

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

数据采集器

Product Compatible Note
CR1000X (retired)
CR1000Xe
CR200 (retired)
CR200X (retired)
CR205 (retired)
CR206 (retired)
CR206X (retired)
CR210 (retired)
CR211 (retired)
CR211X (retired)
CR215 (retired)
CR216 (retired)
CR216X (retired)
CR295 (retired)
CR295X (retired)
CR300 (retired) The CR300-series dataloggers do not have the necessary CS I/O port required by the CR1000KD for connection to the data logger.
CR3000 (retired)
CR310 The CR300-series dataloggers do not have the necessary CS I/O port required by the CR1000KD for connection to the data logger.
CR350 The CR350-series dataloggers do not have the necessary CS I/O port required by the CR1000KD for connection to the data logger.
CR5000 (retired)
CR6
CR800 (retired)
CR850 (retired)

常见问题解答

CR1000KD: 5

展开全部收起全部

  1. Is it possible to use the CR1000KD to connect to remote RF stations using an RF modem and a radio?
  2. Can the constants located within the ConstTable/EndConstTable instructions be edited?
  3. Are custom menus displayed on the terminal interface?
  4. Is there a way to allow a user to change constants in a CR800, CR1000, CR3000, or CR6 program without allowing the user to make other program changes?
  5. Are the CR800 and CR1000 capable of being programmed through a CD100 or CR1000KD without the use of computer software?
访问常见问题解答资料库