不需打开机箱便可读取数据以及输入指令
概览
CD100 是一款带按键的可安装显示屏。用于输入和显示数据采集器的数据。真空荧光显示屏，可以在非常广泛的温度范围内使用。其操作与CR1000KD相同。
优势与特点
- Without opening the enclosure, check the data logger's status, display or plot sensor readings, and stored values, as well as enter numeric data
- Supports custom menus and displays to simplify routine operations
- Provides water and dust ingress protection rating IP66 when installed in enclosure lid
图像
技术说明
CD100 允许用户核查数据采集器的状态，查看或划分传感器的读数以及存储的数值，还可输入数字数据，或者触发端口。数据采集器可设置安全程序，以免未授权人员访问数据。
CD100 带有16位键盘和21字符/行，共8排的显示屏（或64 x 128 像素的绘图）。可带手套操作键盘。
CD100 防水防尘保护功能，置于机箱盖上时，IP66等级。
定制菜单和显示
CD100支持用户定制简单的日常操作菜单。日常应用包括查看数据，绑定管理功能，翻阅注意事项等。个别菜单屏幕支持多达8行的文本显示，最多为7个变量。
产品规格
| Display/Keyboard Description |
|
| Keypad | 16 key, alphanumeric |
| Interface | CS I/O, SDC address 2 |
| Power Requirements | Powered from the data logger's CS I/O port. |
| Water & Dust Ingress Protection Rating | IP66 (when installed in enclosure lid) |
| Temperature Range |
|
| Dimensions | 17.5 x 13.7 x 3.6 cm (6.9 x 5.4 x 1.4 in.) |
| Weight | < 0.5 kg (< 1 lb) |
Current Drain |
|
| Quiescent | Negligible (0.02 mA) |
| Active | 140 mA |
兼容性
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
数据采集器
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | ||
| CR1000X (retired) | ||
| CR10X (retired) | ||
| CR200X (retired) | ||
| CR206X (retired) | ||
| CR211X (retired) | ||
| CR216X (retired) | ||
| CR23X (retired) | ||
| CR295X (retired) | ||
| CR300 (retired) | The CR300-series dataloggers do not have the necessary CS I/O port required by the CD100 for connection to the data logger. | |
| CR3000 (retired) | ||
| CR310 | The CR300-series dataloggers do not have the necessary CS I/O port required by the CD100 for connection to the data logger. | |
| CR350 | The CR350-series dataloggers do not have the necessary CS I/O port required by the CD100 for connection to the data logger. | |
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | ||
| CR6 | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000 (retired) |
常见问题解答
CD100: 4
展开全部收起全部
-
CustomMenu instructions apply to the CR1000KD, CR850, and CR3000 display. Custom menus are not displayed or passed through to the terminal interface.
-
In OS 24 (CR6 OS 01) and later, a user can change constants from the CR1000KD or a terminal emulator without touching the program. The program must contain a ConstTable/EndConstTable construction for this to occur. Because the program does recompile, collect the data first.
-
-
Although it is recommended to use software such as Short Cut for programming, the CR800-series, CR1000, and CR3000 dataloggers can be programmed with the CD100, CR1000KD, or integrated keypads. The keypad can be used to create new programs or edit programs that already exist in the data logger memory.
From the CD100 or CR1000KD home screen, follow these steps to get started:
- Press Enter.
- Select File and press Enter.
- Select either New or Edit.
- To modify an existing instruction, select the instruction, and press Enter.
- To add a new instruction, press Ins, and select Instruction.