Services Available | |
---|---|
Repair | No |
Calibration | No |
Free Support | No |
PConnect 软件支持Palm 操作系统的PDA 与坎贝尔数据采集器之间的通讯。它可让您携带您的PDA与线缆,而不是笔记本电脑,连接您的数据采集器并下载数据。
该软件以CD-ROM形式提供。PDA和数据采集器之间的连接可由多种形式支持(直接串口连接、RF401系列射频电台、SC-IRDA红外接口和蓝牙)。更多详细信息请查看兼容性标签。
PConnect能用于从数据采集器下载数据,和转换数据到办公室计算机。所下载的数据在HotSync过程中转移到计算机上。这种过程也同步PDA与计算机之间的程序文件。
PConnect所支持的功能包括:
Current Version | Version 3.4 began shipping in December 2009. |
Software Requirements |
|
PDA Operating System | Palm OS Version 3.3 or later (Pocket PC OS-based PDAs require PConnectCE.) |
Operating Temperature | -25° to +50°C |
PDA to RS-232 Cable Length | 38.0 cm (15.0 in.) |
PDA to RS-232 Cable Weight | 75 g (2.6 oz) |
PDA to CS I/O Connector Dimensions | 2.3 x 4.1 x 7.6 cm (0.9 x 1.6 x 3.0 in.) |
PDA to CS I/O Connector Weight | 41 g (1.6 oz) |
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Product | Compatible | Note |
---|---|---|
21X (retired) | ||
CR10 (retired) | ||
CR10X (retired) | For the CR510, CR10X, and CR23X, support for both the mixed-array and PakBus® data logger operating systems is provided in PConnect version 3.0 or higher; prior versions only supported the mixed-array OS. | |
CR200X (retired) | The CR200X-series dataloggers require PConnect version 3.0 or higher. | |
CR206X (retired) | The CR200X-series dataloggers require PConnect version 3.0 or higher. | |
CR211X (retired) | The CR200X-series dataloggers require PConnect version 3.0 or higher. | |
CR216X (retired) | The CR200X-series dataloggers require PConnect version 3.0 or higher. | |
CR23X (retired) | For the CR510, CR10X, and CR23X, support for both the mixed-array and PakBus® data logger operating systems is provided in PConnect version 3.0 or higher; prior versions only supported the mixed-array OS. | |
CR295X (retired) | The CR200X-series dataloggers require PConnect version 3.0 or higher. | |
CR3000 (retired) | The CR3000 requires PConnect version 3.2 or higher. | |
CR500 (retired) | ||
CR5000 (retired) | ||
CR510 (retired) | For the CR510, CR10X, and CR23X, support for both the mixed-array and PakBus® data logger operating systems is provided in PConnect version 3.0 or higher; prior versions only supported the mixed-array OS. | |
CR800 (retired) | The CR800 and CR850 require PConnect version 3.3 or higher. | |
CR850 (retired) | The CR800 and CR850 require PConnect version 3.3 or higher. | |
CR9000 (retired) |
--OR--
PDA-to-serial cable or cradle (one end of the cable/cradle must terminate in a 9-pin serial connector) is required. The cable/cradle connects to the PDA-to-CS I/O connector or PDA-to-RS232 cable via the 9-pin serial connector. This cable/cradle may be included with the PDA, or it may need to be purchased as a separate accessory from the PDA manufacturer or a third party supplier.
Third-party Bluetooth serial adapter is required. The interface and/or cables that are used to connect the adapter to the data logger will vary, depending upon whether the device acts like a DTE (computer) device or DCE (PDA) device. In some instances, this is evident by the pin-out of the adapter, but not always. A general rule is if the adapter has a 9-pin female connector, then the adapter is connected to the data logger using the PDA-to-CS I/O connector for the CS I/O port or the PDA-to-RS232 cable for the RS-232 port. If the adapter has a 9-pin male connector, then the adapter is connected to the data logger using an SC32B for the CS I/O port or it can be connected directly to the RS-232 port.
Upgrade PConnect 3.0 thru 3.3 to version 3.4. PConnect 3.0 or newer must be installed on your machine.
PCONNECT: 4
展开全部收起全部
PConnect is installed on the PC. When the HotSync utility is used with the Palm device, PConnect is transferred to the Palm device. For more information, refer to the instruction manual.
Use PConnect software for Palm devices or PConnectCE software for Windows Mobile devices.