This product is not available for new orders. We recommend ordering: NL116.
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
概览
Campbell Scientific的 NL115 模块支持10baseT 以太网通讯，并能将数据存储可移除的CompactFlash® 内存卡。这种小巧且坚实耐用的通讯设备连接到CR1000 或 CR3000数据采集器的40-针外设端口上。
优势与特点
- Provides Ethernet communications and additional data storage for a CR1000 or CR3000 datalogger
- Ethernet connection allows for data logger communications over a local area network or the Internet via TCP/IP
- Removable CompactFlash cards can provide long-term data storage
- Small, light-weight CF cards fit in your pocket for easy transport between the data logger and PC
图像
3D/CAD 文件：
技术说明
NL115 允许数据采集器通过局域网或通过TCP/IP的专线互联网连接进行通讯。使用10baseT 的以太网直通线缆，当从集线器连接到NL115。使用10baseT 的以太网交叉线缆，如果直接从计算机连接到NL115。
NL115的CF卡卡槽功能可用于扩展数据采集器的内存，转移数据/程序，从野外站点到办公室，以及上载供电启动功能。需要使用I型或II型的CompactFlash (CF)卡，插入NL115的卡槽中。
只应当使用工业级的CF卡，用于我们的产品。尽管消费者级别的卡费用比工业级卡更低，但消费者级别的卡更可能出故障，导致卡本身和所存储数据两者的损失。工业级卡还可以在更宽的温度范围内工作，使用寿命也比消费者级别的卡更长。
存储在卡里的数据，可以通过将卡移除，使用读卡器来读取其中的数据，或者通过与数据采集器的通讯连接来获取其中的数据。计算机可以使用自己的PCMCIA 卡槽和CF1 适配器，或者使用计算机的USB端口和17752内存卡读写器，来读取存储在CF卡中的数据。
CardConvert程序用于转换和保存CompactFlash®卡中的二进制数据文件。CardConvert 包含在我们的PC200W、PC400、LoggerNet和RTDAQ 等数据采集器支持软件里面。
产品规格
| Power Requirements | 12 V supplied through the data logger’s peripheral port |
| Ethernet Speed | 10Base-T (10 Mbps), half-duplex |
| Typical Access Speed | 200 to 400 kbits s-1 |
| Memory Configuration | User selectable; ring (default) or fill-and-stop |
| CF Card Requirements | Industrial-grade |
| Data Logger Operating System (OS) | The CR1000 OS must be OS 9 or later. Both the CR1000 and CR3000 need OS 25 or later to read cards with more than 2 GB of storage. |
| Typical Current Drain |
|
| Dimensions |
|
| Weight | 154 g (5.4 oz) |
EMI and ESD Protection |
|
| European Standards | Meets requirements for a class A device under European Standards. |
| Application of Council Directive(s) | 89/336/EEC as amended by 89/336/EEC and 93/68/EEC |
| Standards to Which Conformity Is Declared | EN55022-1; 1995 and EN50082-1: 1992 |
Software Requirements |
|
| LoggerNet | Version 3.2 or later |
| PC400 | Version 1.3 or later |
| DevConfig | Version 1.5 or later |
兼容性
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
数据采集器
| Product | Compatible | Note |
|---|---|---|
| CR200X (retired) | ||
| CR206X (retired) | ||
| CR211X (retired) | ||
| CR216X (retired) | ||
| CR295X (retired) | ||
| CR3000 (retired) | ||
| CR5000 (retired) | ||
| CR800 (retired) | ||
| CR850 (retired) |
固定设备
| Product | Compatible | Note |
|---|---|---|
| ENC10/12 | ||
| ENC10/12R | Attached to a CR1000 or CR3000 | |
| ENC12/14 | Attached to a CR1000 | |
| ENC14/16 | Attached to a CR1000 or CR3000 | |
| ENC16/18 | Attached to a CR1000 or CR3000 | |
| ENC24/30 | Attached to a CR1000 or CR3000 | |
| ENC24/30S | Attached to a CR1000 or CR3000 |
Additional Compatibility Information
CompactFlash (CF) Cards
Campbell Scientific offers and recommends several CF cards (see Ordering tab). These cards have passed Campbell Scientific's ESD testing and operate properly with our data loggers.
Only industrial-grade CF card should be used with our products. Although consumer-grade cards cost less than industrial-grade cards, the consumer-grade cards are more susceptible to failure resulting in both the loss of the card and its stored data. Industrial-grade cards also function over wider temperature ranges and have longer life spans than consumer-grade cards.
Software Requirements
The NL115 is set up using the Device Configuration utility (DevConfig). The NL115 requires LoggerNet 3.2 or later, PC400 1.3 or later, and DevConfig 1.5 or later.
Data Logger Considerations
The NL115 fastens onto the data logger's 40-pin peripheral port. This means that the NL115 is only compatible with the CR1000 and CR3000. It is NOT compatible with the CR800, CR850, CR200X, CR5000, or CR9000X dataloggers.
To read cards with more than 2 GB of storage, the data logger operating system must be OS 25 or later.
常见问题解答
NL115: 31
展开全部收起全部
-
The file on the card is open until the program is stopped or the button on the device is pressed.
-
Review the CRBasic Editor Help for information on the TableFile() instruction.
-
The NL115 doesn’t have a MAC address. The MAC address is on the data logger.
-
Yes. The CR1000 and CR3000 can communicate via Modbus or DNP3. The data logger will need to be programmed for this output.
-
Yes. The data logger needs to be programmed to use FTP.
-
No. Only a program change could cause this. To save data to a CFM100 or an NL115, a CardOut() or TableFile() instruction must be present in at least one data table.
-
No. The CR800 and CR850 do not have the necessary peripheral port to connect to an NL115.
-
The NL115 isn’t configurable for an IP address. The IP address is set in the data logger using the Device Configuration Utility.
案例研究
Tropical volcanic islands are biodiversity hotspots where the Critical Zone (CZ) remains poorly studied. In......阅读更多
As concern over changing climate conditions in the world was growing in the late 1990s,......阅读更多
Scientists and land-use managers have long recognized the importance of forest lands for their role......阅读更多