Visual气象软件用于我们的气象站,3.0 或更高的版本支持用户定制的气象站,ET107,ET106 和MetData1 预配置气象站。软件支持初始化设置,访问站点,显示数据及从一个或多个气象站生成数据。
VisualWeather software is for customers who want reliable, real-time weather data and printed reports without worrying about technical details, such as programming or maintaining databases. It allows our pre-configured or custom Campbell Scientific stations to be set up in a few minutes. Multiple weather stations are supported.
VisualWeather's functionality includes program generation, communications, and report generation for preconfigured and custom weather stations. It uses a wizard to walk you through setting up the sensors for your weather station, configuring the communications link and data logger settings, and defining reports. Based on this setup information, VisualWeather generates the data logger program for the weather station (for preconfigured stations). You can also use Short Cut (included) for programming custom weather stations.
Communication protocols supported include direct connect, short haul modem, phone modem (including TAPI), RF, phone-to-RF, and TCP/IP. While connected to a weather station with VisualWeather, you can view measurements related to overall data logger health (battery voltage, internal temperature, error counters), current conditions for the weather station, and current measurement values for each of the sensors being measured, as well as data tables stored to memory (for table-based data loggers). Data can be collected for VisualWeather's report database either manually or on a schedule.
Report generation offers a variety of preconfigured reports for preset or custom intervals based on what sensors are being measured. It also offers a number of calculated values, such as evapotranspiration, Growing Degree Days, etc. The reports are displayed on the screen, and the user can print them or save them as an image file. Data can also be exported to an ASCII file for further analysis (for those familiar with Campbell Scientific's data formats, it is TOACI1, which is a comma-delimited data file with heading information). Batch processing of reports is available to automate report generation.
This software is protected by United States copyright law and international copyright treaty provisions. Installation of this software constitutes an agreement to abide by the provisions of its licensing agreement. The agreement grants the user a non-exclusive license to use the software in accordance with the following:
This software may not be sold, included, or redistributed in any other software or altered in any way without prior written permission from Campbell Scientific. All copyright notices and labeling must be left intact.
Current Version | 3.1.3 |
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Product | Compatible | Note |
---|---|---|
21X (retired) | ||
CR10 (retired) | ||
CR1000X (retired) | ||
CR10X (retired) | ||
CR200X (retired) | ||
CR206X (retired) | ||
CR211X (retired) | ||
CR216X (retired) | ||
CR23X (retired) | ||
CR295X (retired) | ||
CR300 (retired) | ||
CR3000 (retired) | ||
CR310 | ||
CR350 | ||
CR500 (retired) | ||
CR5000 (retired) | ||
CR510 (retired) | ||
CR6 | ||
CR800 (retired) | ||
CR850 (retired) | ||
CR9000 (retired) |
Visual Weather supports ET107, Toro T107, ET106, MetData1, or custom Campbell Scientific stations. Support for custom weather stations was added in version 2 (released September 2005), and support for the ET107 and Toro T107 was added in version 3.0 (released April 2009).
Upgrade Visual Weather version 2.0, 2.1 or 2.2 to 2.3.
This patch requires that version 2.0, 2.1 or 2.2 exists on the computer.
Upgrade Visual Weather version 3.x to 3.1.3.
This patch requires that version 3.x exists on the computer.
A fully functional 30 day trial version of VisualWeather.
VisualWeather is for those who want reliable, real-time weather data and printed reports without worrying about technical details.
VISUALWEATHER - Retired: 33
展开全部收起全部
In the “Backup/Restore Network” entry of VisualWeather Help, it states the following: “Note: Beginning with VisualWeather 3.0, a restore cannot be performed from a backup file created using a version of VisualWeather prior to version 3.0.”
If a 2.2 backup is restored to a version 3.0 or later, the network structure (that is, station information) will be saved, but the database or historical data will not be saved. The following process, however, can be used to resolve this issue:
Add reports by following these steps:
When the batch runs, files are created in the web folder, transferred automatically via FTP to the website, and added automatically to the web page. They are listed as additional options on the drop-down report that is displayed after clicking the weather station name in the top left corner.
The VisualWeather products serve different needs:
No, but this feature has been enabled with the release of the VisualWeather 3.1.3 patch. To view and download software patches for VisualWeather, go to the Downloads section of the VisualWeather product page.
No. The purchased version is separate from the trial version. However, any files created using the trial version are stored in the C:\Campbellsci\VisualWeather folder and will be available for use when the purchased version is installed.
When a station is created in VisualWeather, either a station is selected that VisualWeather knows about or VisualWeather is told about a custom station that has been created. Part of this process involves telling VisualWeather what data is being collected at the station.
Based on the station information, VisualWeather maps the data from the station to controls that can display that data. This data is displayed when the station data is viewed by either of these methods:
FTP refers to File Transfer Protocol. It is a method for transmitting files electronically. There is a free FTP client called FileZilla Client that is available on the Internet and offers a number of useful features. This tool, however, may not seem intuitive to a beginner. It may be more helpful for beginners to ask their facility’s IT staff person for assistance in uploading the necessary files.
There are maximum pointers on three values on the standard VisualWeather screen: Rain Fall, Air Temperature, and Relative Humidity. The pointers can be reset by following these steps:
No. The contents of the XML file created for web output are only there for backward compatibility and cannot be controlled by the user.
The format and controls on the Active Monitoring and Passive Monitoring screens are saved in files. These files are stored in the RTMC folder in the VisualWeather directory (usually C:\Campbellsci\VisualWeather\RTMC). The extension of these files is .rtmc2. These files can be edited and changed using the RTMC developer software that comes with LoggerNet or the stand-alone RTMCPro Real-Time Monitoring and Control Software.
In the RTMC folder, there are two or more RTMC screens. One screen is named after the station (for example, VW_CR10X.rtmc2). The other screen is titled VW_MultiStation.rtmc2.
The “Station Data” entry in VisualWeather Help offers the following: “Note: The data is displayed as a project developed with Campbell Scientific’s RTMC Pro Development software. The project file is VW_Multistation.rtmc2 and is saved in C:\CampbellSci\VisualWeather\RTMC. If you have RTMC Pro, you may make changes to this project (that is, display additional components). Once you have made changes to the project, VisualWeather will not modify the project. If you want to revert to VisualWeather’s default project, you will need to delete the project file. VisualWeather will then recreate the project the next time Station Data is opened.”
Campbell Scientific recommends keeping a backup after each editing change to a screen.